Dump trucks earn their living in some of the toughest workplaces around: large-scale construction sites, mines and quarries to name but a few. The largest of them are known as "off-highway trucks" which cannot be driven on public roads; factory built, they are disassembled and component parts such as the chassis, cab, fenders, axles and rear bed are transported via trailer to their employer, where they are re-assembled on site. These giant vehicles can reach the height of 2-storey buildings, with tires exceeding 4 meters in diameter, engines generating over 3, 500hp, and an ability to carry loads topping 300 tons. Some can even be controlled remotely for use in dangerous environments. Now, you can feel the power scaled down into realistic 1/24, with the addition of this exciting new R/C model assembly kit, with realistic yellow ABS resin molded cab and rear bed parts. The model runs on the gear-driven 4WD of the GF-01 chassis.
The GF-01 chassis plays off the successful and fun line-up of RC kits such as the Wild Willy 2, Type 2 and the Farm King Wheelie. Whereas those kits featured a 2WD and easy to wheelie platform, the new GF-01 is a 4WD incarnation with the motor directly placed in the center in order to drive the gears in the front and rear gearboxes.
GF-01 Chassis:
This gear-driven 4WD chassis is based around a light weight and tough monocoque frame, with power provided by the centrally-positioned motor. It utilizes a 'square' setup with similar tread and wheelbase lengths. Sealed gearbox is integrated into the frame and protects from dust and debris, while the built-in front and rear differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension and friction dampers plus a 2-piece tie rod steering setup with the servo on the left for excellent response. Furthermore, it has wheels molded in yellow to match the chassis, fitted with big 115mm diameter tires, in addition to a rear support bar with roller to prevent the model from flipping.
Required to Complete: 2-channel radio, steering servo, 7.2volt battery and battery charger
- Equipped with 4-wheel double wishbone suspension, friction dampers, and a large bumper.
- Servo position on the left of the chassis contributes to excellent balance and steering response.
- The model can also be shown with the rear bed raised (display only) using 2 stays.
- Lug pattern spike tires ensure that this heavy dump truck has plenty of traction!
- 1/24 Scale, 4WD, Multi-Purpose
- length: 350mm, width: 270mm, height: 210mm, Wheelbase: 174mm
- Construction Type: Assembly Kit
- Chassis Type: GF-01
- Chassis Material: ABS Plastic
- Adjustable Gear Ratio: Fixed
- Bearings: Plastic bushing
- Body Stickers: Included
- Body Material: ABS Plastic
- Differential Type: 3-Bevel Type Gear Differentials
- Electronic Speed Control (esc)
HobbyWing THW 1060 Brushed Motor ESC (2-3S)
- Motor: 540-brushed type
- Shock Damper Friction type
- Suspension: Fully Independent Double Wishbone