LiPo 2S 7.4V 300mAh 30C JST/E-Flite PH Plug 2
Description
with JST and E-Flite JST-PH Plugs.
Dual power leads allows fliers to adapt to a JST standard plug, or a
JST-PH plug which is a popular connector for many 2S E-Flite
airframes
5C fast charge capable
Plugs
LiPo Charging Bag
Weight: 0.6oz (17.2g)
Capacity: 300mAh
Continuous Discharge: 30C (9A)
Minimum Discharge Voltage per Pack: 6V
Max Burst Rate: 60C (18A)
Max Volts Per Pack: 8.4V
Suggested Charge: 1C (0.3A)
Max Charge Rate: 5C (1.5A)
Plug Type: JST and E-Flite JST-PH
Watt Hours: 2.22
Wire Gauge: 20 AWG low resistance silicone coated wire
NEVER Charge over 4.20V per cell
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
Charging
ALWAYS charge in a fireproof location
ALWAYS Keep out or reach of children
Manufacturer information
customerservice@venom-racing.com All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
2.50 ounces
70.87 grams
0.16 pounds
Package dimensions
6.50 x 4.50 x 1.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️