Mylaps Hybrid (2-Wire) Transponder
Description
Backwards compatible
The Hybrid (2-wire) transponder is the same size and features many of the same specs as the RC4 transponder, but it is backwards compatible with older decoder boxes. This transponder does not support car ID numbers. It is compatible with all AMBrc2 decoder boxes and MyLaps RC3 and RC4 decoder boxes.
Dimensions (excluding holder): 16 x 19 x 6mm
Weight with holder: 4.7g
Operating voltage: 3.0-16.0 VDC
Power consumption: 14mA @ 6VDC
Wire insulation (Gasoline/Nitro-methane resistant): PTFE
Holder: Included
Connection plug: standard Servo plug
The Hybrid (2-wire) transponder is the same size and features many of the same specs as the RC4 transponder, but it is backwards compatible with older decoder boxes. This transponder does not support car ID numbers. It is compatible with all AMBrc2 decoder boxes and MyLaps RC3 and RC4 decoder boxes.
Dimensions (excluding holder): 16 x 19 x 6mm
Weight with holder: 4.7g
Operating voltage: 3.0-16.0 VDC
Power consumption: 14mA @ 6VDC
Wire insulation (Gasoline/Nitro-methane resistant): PTFE
Holder: Included
Connection plug: standard Servo plug
Manufacturer information
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
784695987210
AIT10R078
Additional details
Shipping weight
0.80 ounces
22.68 grams
0.05 pounds
Package dimensions
1.50 x 3.50 x 5.50
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️