Mylaps RC4 (3-Wire) Transponder
Description
Supports ID numbers
The RC4 (3-wire) transponder is the latest in the line of transponders from MyLaps. The RC4 transponder supports car ID numbers so you can have the same transponder number in all your cars, with a different ID for each. The RC4 transponder also gives additional telemetry data such as voltage to the transponder and transponder temperature each time the loop is crossed. This transponder will only work on RC4 decoder boxes with version 4 firmware or higher.
Dimensions (excluding holder): 16 x 19 x 6mm
Weight with holder: 4.7g
Operating voltage: 3.0-16.0 VDC-16.0 VDC
Power consumption: 14mA @ 6VDC
Wire insulation (Gasoline/Nitro-methane resistant): PTFE
Holder: Included
Connection plug: standard Servo plug
The RC4 (3-wire) transponder is the latest in the line of transponders from MyLaps. The RC4 transponder supports car ID numbers so you can have the same transponder number in all your cars, with a different ID for each. The RC4 transponder also gives additional telemetry data such as voltage to the transponder and transponder temperature each time the loop is crossed. This transponder will only work on RC4 decoder boxes with version 4 firmware or higher.
Dimensions (excluding holder): 16 x 19 x 6mm
Weight with holder: 4.7g
Operating voltage: 3.0-16.0 VDC-16.0 VDC
Power consumption: 14mA @ 6VDC
Wire insulation (Gasoline/Nitro-methane resistant): PTFE
Holder: Included
Connection plug: standard Servo plug
Manufacturer information
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
784695987227
MLP-10R120
AIT10R120
Additional details
Shipping weight
0.80 ounces
22.68 grams
0.05 pounds
Package dimensions
1.50 x 3.50 x 5.50
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️