This is the Radio Controlled, Electric Powered, 1/10 scale
Team Associated RC10SC5M Short Course Truck Kit.

Chassis: Hard anodized aluminum with centralized mass and mid-motor
position, fits R. O. A. R. -approved 2S saddle packs and 2S short packs
with optional foam inserts
Drive: Rear wheel
Transmission: Updated four-gear transmission with lighter aluminum
top shaft, stronger gears, ball bearings
Differential: Ball type, 14 carbide balls
Slipper Clutch: Factory Team VTS with high-resolution spring for
finer adjustments
Front Suspension: Inline design, heavy duty steering and caster
blocks, adjustable mount angle options, heavy duty ball cups and
studs
Shocks: Oil-filled aluminum body Factory Team 12mm Big Bore with
0.12" (3mm) diameter shafts
Body: Clear Pro-Line
Steering: Full ball bearing system with horizontal ball studs for
finer Ackerman adjustments, Ackerman describes the effect of the
inner front wheel turning faster that the outer front wheels during
turns
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

RC10SC5M Short Course Truck Kit with Clear Body, Decals, Shock Fluid,
Window Mask Sheet and Instruction Manual
REQUIREMENTS
Radio: 2-channel with high-torque steering servo
Motor: 540 size
Electronic Speed Control: To match selected motor
Battery: 7.4V LiPo or 6.6V LiFe, saddle, shorty or square pack
compatible
Pinion Gear: 48P, number of teeth determined by motor
Tires: 1/10 scale short course with foam inserts
Wheels: 1/10 scale short course
Tire glue, paint, building and track equipment

Vehicle;
length: 21.2" (540mm)
Wheelbase: 12.6-12.7" (320-324mm) adjustable
Body;
length: 21.2" (540mm)
width: 9.1" (231mm) at narrowest point
11" (280mm) at rear wheels, widest point
height: 5.5" (140mm)