1/8 Monster X Esc W/2650kv Sensored Motor010014504
Description
This is the Castle Creations Mamba Monster X Waterproof
Electronic Speed Control and the 1512 1Y 2650Kv Sensored brushless Motor.
For 1/8 scale buggies, truggies and on-road vehicles, and 1/10 scale
monster trucks weighing up to 15lbs (6.8kg)
2S-6S LiPo compatible
Adjustable BEC (battery eliminator circuit) 5.5V, 6.0V, 7.5V, or 8.0V
8A Peak), default 5.5V
Profiles can be custom designed on a PC with the Castle Link
PC programming software (software not included, can be
downloaded for free from Castle's website, voucher is included for
free Castle Link Programmer)
Castle Link Adjustable settings include;
Brake/Reverse Type
LiPo Cutoff Voltage
Brake Amount
Drag Brake
Motor Type
Programmable Auxiliary Wire (AUX) allows adjustments to several
settings such as torque control and max throttle from a compatible
transmitter
Sensored motor capable with purchase of optional (not included)
Sensor harness from Castle Creations
Telemetry ready with purchase of Castle Creations S. BUS Telemetry
Link
One year limited warranty through Castle Creations on both components
beginning at date of purchase
Motor; CSEC6100
Ideal for 1/8 scale off-road and on-road vehicles, and 1/10 scale
4WD short course trucks up to 9lbs (4082g)
High strength neodymium sintered magnets with high strength para-aramid synthetic fiber
wrap
High performance 0.2mm steel laminated stacked stator
Four pole configuration for maximum efficiency at high RPM
Vibration dampening wave spring
High-temperature, high purity copper windings
CNC machined 6061-T6 anodized aluminum can and endbells
Hardened stainless steel shaft
Low resistance gold-plated solder tabs
10AWG high strand count insulated wire with 6.5mm femal bullet
connectors
Sensor board with temperature stabilized sensors
Battery Leads, Receiver Connector, Female Motor Connectors, 30mm
Cooling Fan
1512 1Y 2650Kv Sensored brushless Motor with Sensor Wire and three
6.5mm Female Connectors
Input Voltage Range: Min. 2S LiPo, Max. 6S, 25.2V
BEC
Brake: Proportional
Reversible: Yes, with lockout
On/Off Switch: Yes
Weight: 3.91oz (111.1g) with wires
Motor;
Input Voltage Range: 2-4S LiPo
Kv: 2650
Max. RPM: 60, 000
Max. Recommended Vehicle Weight: 9lbs (4082g) with battery RTR
length: 2.7" (67.7mm)
diameter: 1.6" (41.4mm) with fins
Weight with Wires: 13.6oz (385g)
Shaft diameter: 0.196" (5mm)
Shaft length: 0.79" (20mm)
Mounting Hole
Connectors: 6.5mm Male Castle Bullet
operated in wet conditions, rinse with fresh water to remove
dirt or corrosives, then fully dry unit. Cooling fan is not
waterproof and must be removed prior to driving in wet conditions.
jxs 03/20/17
ir/jxs
&
Manufacturer information
Your Mamba is warranted for one (1) year from date of purchase to be free from manufacturing and component defects. This warranty does not cover abuse, neglect, or damage due to incorrect wiring, over voltage, or overloading. If you have any questions, comments, or wish to return your Mamba for warranty or non-warranty repair/replacement contact Castle Creations at: Castle Creations 402 E. Pendleton Ave. Wellsville, KS 66092 Tel: (785) 883- 4519 Email: info@castlecreations.com Fax: (785) 883- 4571 Website: http://www.castlecreations.com All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
24.80 ounces
703.11 grams
1.55 pounds
Package dimensions
6.38 x 6.25 x 3.13
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️