1/10 Fazer VE Porsche 918 Spyder Silver 4WD RTR
Description
Chassis: Plastic, bathtub type, chassis is compatible with other 200mm bodies
Drive: Four wheel shaft
Motor: 2400kV Team Orion NEON ONE, motor mount removes with three bolts and allows adjustment of gear backlash through the eccentric cam
Radio: FHSS Synchro-200 2.4GHz 2-channel transmitter with dual rates, 4-channel receiver and KS204WP high response and high torque waterproof steering servo
Electronic Speed Control: 35A Waterproof Team Orion R10 One
Battery: Team Orion 7.2V 1800mAh NiMh stick pack with Standard connector
Battery Charger: 110V wall type
Body: Trimmed and painted Porsche Spyder 918 body
Front Bumper: Foam
Ball Bearings: Full set included, 17 total
Tires: Diameter 2.7 (68.5mm), width 1.02 (26mm) slick rubber, also includes set of hard rubber drift tires mounted to wheels
Wheels: 0.94 (24mm) wide, 2 (51mm) diameter, silver in color
Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Non-adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
RTR Kyosho Fazer VE Car with brushless Motor, ESC, 2.4GHz Radio
NiMh Battery, Wall Charger, extra set of Drift Tires, Painted Body
and Instructions
AA Batteries: Four for transmitter
Vehicle-
length: 15.1 (383mm)
width: 7.9 (200mm)
height: 3.14 (80mm)
Wheelbase: 10.2 (260mm)
Front and Rear Tread: 6.8 (174mm) center of tires measured side-to-
side
Gear Ratio: 6.34:1
Weight: 3.74lbs (1, 700g)
Body-
length: 17.3 (440mm)
width: 8.5 (216mm) at rear wheels, widest point
height: 3.9 (101mm)
COMMENTS
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 12x18mm Fr Diff 1 DTXC1597
2 12x18mm Rear Diff 1 DTXC1597
2 5x10mm Gear Shaft 1 DTXC1535
1 10x15mm Gear Shaft 1 DTXC1595
2 5x10mm Center Unit 1 DTXC1535
4 5x10mm Front Uprights 2 DTXC1535
4 5x10mm Rear Uprights 2 DTXC1535
jxs 11/10/14
ir/jxs
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
131.80 ounces
3736.46 grams
8.24 pounds
Package dimensions
9.00 x 10.00 x 26.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️