Through-The-Body Mock Side Exhaust Tips Black
Description
RPM R/C Products brand pair of Through the Body Mock Exhaust Tips from RPM.
Molded plastic construction, black in color
Modeled from a full-sized 3 (76.2mm) diameter exhaust tip cut at a
45 angle
Installs on 1/10 scale polycarbonate RC car bodies
Flanges and support plates install on back side of body and hold
each exhaust tip in place
Two Through the Body Mock Exhaust Tips with Flanges, Mounts, two
3x8mm Flat Head Screws and Instructions
Tip diameter: 0.41 (10.5mm)
COMMENTS
RPM Exhaust Tips are for appearance only and cannot be made to
function with a real exhaust system. There must be at least 3/8
(9mm) clearance behind the body to avoid interference from the
chassis.
jxs 04/07/14
ir/jxs
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Ascender 1:10 Chevrolet K5 Blazer
Clodbuster and Super Clodbuster
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
0.32 ounces
9.07 grams
0.02 pounds
Package dimensions
3.99 x 3.99 x 0.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️