discontinued 1/10 RS Gen2 ESC/8.5 Sensored BL Motor System
This part is discontinued and we no longer carry it.
Description
Tekin brand Tekin RS Gen 2 ESC brushless Electronic Speed Control
with the 8.5T Redline Gen2 Sensored brushless Motor.
FEATURES:
RS Gen 2 ESC (TEKM1154);
Compatible with sensored, sensorless, brushless, and brushed motors
High voltage programmable Battery Eliminator Circuit (BEC)
HotWire PC interface for advanced programming and updating, EZ access
programming port (HotWire Interface (TEKM1450), and Gen 2 Adaptor
(TEKM3825) required)
Forward, brake, and reverse operation
D2 Dual Drive Mode technology
On-board temperature indicator
Sensor plug for precise commutation with all motors
Gold plated solder posts
Pit tune mode
Self test diagnostics and factory reset
DGF2 Digital Glitch Filtering V2
QuickTune programming with one-touch radio calibration
8.5T Redline Gen2 Motor (TEKC2410);
Specifically designed for 1/12 scale 1S LiPo and stock racing
Legal in major governing racing bodies
Dual plug sensor wire harness for all sensored and sensoreless
systems
CNC machined T 6061 billet aluminum heat sink can with anodized
endbell plates
High RPM precision bearings
High purity copper windings
Adjustable timing
Neodimium sintered magnet
120 day limited warranty through Tekin beginning at date of purchase
YOU WILL RECEIVE:
RS Gen 2 brushless ESC with Instructions, Motor and Receiver Wires
8.5T Redline Gen2 Motor with Sensor Wire
SPECIFICATIONS:
ESC;
Input Voltage: 4-9 cells, 2S-3S LiPo
BEC: 6.0V/7.4V, 5.5amps
brushless Mode Motor Limit: 8.5 turn, 540 2-pole (36mm)
Brushed Mode Motor Limit Forward Only: 10 turn
Brushed Mode Motor Limit Reverse: 12 turn
Max Current: 120amps per phase
Timing Profiles: 7 choices on-board
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
DIMENSIONS:
1.0 x 1.3 x .51 (25.4 x 33 x 12.9mm)Weight: 2.0oz (48g) with wiring
8.5T Redline Gen2 Motor;
Weight: 6.2oz (177g)
Shaft
DIMENSIONS:
5 x 15.3mmMotor diameter: 1.40 (35.85mm)
Motor length: 2.03 (51.8mm)
Bearing
DIMENSIONS:
front: 4x13x5mm rear: 1/8x3/8x5/32kV: 5350
Rotor: 13mm
jxs 05/02/13
ir/jxs
Manufacturer information
Additional details
Shipping weight
11.68 ounces
331.14 grams
0.73 pounds
Package dimensions
2.00 x 4.63 x 5.63
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️