Trophy Buggy Flux RTR
Part number
Real-time inventory
Price
Description
User level: RTR, *requires additional parts/components (requires X4 AA for transmitter)
Mode: Off-Road, *4WD
Scale: 1:8
Type: Buggy, *dirt/clay
Power: LiPo, X2 *2-cell
Radio: Transmitter included
Battery: Not included, *Deans/T or S type
Speed Controller: included
Motor: included - 1:8 size
Includes charger: No
HPI brand brushless electric powered, 2.4GHz radio controlled, ready to run
1/8 scale Trophy Flux Buggy Racer from HPI.
rod braces
Drive: Four wheel shaft, with steel outdrives and axles
Motor: Flux Scream brushless 1965kV
ESC: Flux Rage, handles two 2S batteries for up to 4S (14.4V) of
power
Radio: 3-channel 2.4GHz with end point adjustment, servo reversing,
steering dual rate, failsafe and waterproof servo for steering
Radio Tray: Low profile aluminum
Differentials: Bevel Gear type with four internal gears for increased
durability
Shocks: Oil-filled, aluminum body
Shock Towers: 6061 aluminum
Suspension: Extra long arms for greater stability and thick
suspension pins for greater resistance against crash damage
Steering: Bellcrank type with cast aluminum knuckles and servo saver
Body: Painted and trimmed
Bumpers: Front plastic
Wheels: Seven spoke 1.6 (41.8mm), 2.4 (60mm) diameter, 17mm hex
Tires: Hot Bodies Proto, 1.6 (40mm) wide, 4.3(110mm) diameter
Ball Bearings: Full set
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Warranty: Two year limited, valid only in the USA, Canada and South
America
Body, Decals, 3-channel 2.4GHz Radio and 4 AA Batteries and
Instruction Manual
Battery Charger: For selected batteries
Maintenance and track equipment
length: 20.3 (518mm)
width: 11.8 (300mm)
height: 7.1 (180mm)
Wheelbase: 13.1 (333mm)
Track: 11 (280mm) outer edges of tires, side-to-side
Body-
length: 13.1 (333mm)
width: 7.9 (200mm) at widest point
height: 4 (102mm)
Qty. Size Location Qty. Bearing Set
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Front Gearbox 1 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561
jxs 09/20/11
ir/jxs
Manufacturer information
HPI Racing assumes responsibility for it products and will repair or replace any defective product at its sole discretion. HPI believes it is solely responsible for its products, therefore, Hobby Etc., Inc. will not be involved in any replacements. Please contact HPI directly.<br><br>Contact HPI Customer Service for any product related problems at 949-753-1099. HPI Customer Service hours are Monday - Friday 8:00 to 4:30 PST. The HPI website, www.hpiracing.com, has information and frequently asked questions about HPI products.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
177.77 ounces
5039.72 grams
11.11 pounds
Package dimensions
23.00 x 12.75 x 8.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️