Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

Lipo 2s 7.4v 1800mah 30c 1/16 1/18 Hard Case Mini

This part is discontinued and we no longer carry it.

Manufacturer

Duratrax logo

Part number

DTXC1860

Real-time inventory

Out of stockClick to refresh

Price

$49.98
Sale -$14.99
$34.99

This part is discontinued and we no longer carry it.

Description


This is the DuraTrax LiPo 7.4V 1800mAh 30C Hard Case Mini Battery Pack
with 3.5mm Bullets.
FEATURES:
For use in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other
1/16 to 1/18 scale vehicles
YOU WILL RECEIVE:
DuraTrax LiPo 7.4V 1800mAh 30C Hard Case Battery Pack with 3.5 male
bullets to make battery lead
REQUIREMENTS:
Balancer such as the Team Checkpoint Balancer TCPP9150, and 2S 3.5mm
Adapter, TCPP9152
SPECIFICATIONS:
Capacity: 1800mAh
Number of Cells in Series: 2
Rated Voltage: 7.4V
Continuous Discharge Rate: 30C
Maximum Recommended Charge Current: 1C (1.8 amps)
Center Charge Terminal: 2mm Female Bullet
Discharge Terminals: 3.5mm Female Bullets
Pack
DIMENSIONS:
3.5 x 1.3 x 0.7" (88 x 32 x 19mm)
Weight: 3.4oz (96g)
COMMENTS:
Optional Battery Leads;
Deans U Plug, DTXC2216
TRA Plug, DTXC2217
Mini Plug, DTXC2218
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1g
All measurements +/- 1mm
jxs 5/26/09
ir/jxs
&

Manufacturer information

Duratrax logo

Duratrax

1610 Interstate Drive

Champaign, IL 61822

https://www.duratrax.com/

All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.

Compatible vehicles

1:16 E-Revo

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

0753600218602
753600218602

Additional details

Shipping weight

4.32 ounces

122.48 grams

0.27 pounds

Package dimensions

2.50 x 2.50 x 8.00

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️