This is the electric powered, radio controlled, 1/10 scale, ready to run
SC10 Short Course Race Truck with the Pro Comp Body Trim from Associated.
Chassis: Molded composite low CG design with side nerf-bars,
hinged battery hold down strap fits NiMh and LiPo battery packs
Drive: Rear wheel with steel rear dogbone drive shafts
Motor: Associated Reedy Radon 17 turn
Radio: Associated XP2 2.4GHz 2-channel pistol grip with metal gear
steering servo, transmitter does not have charge jack
ESC: Associated XP SC200 forward/reverse with LiPo low voltage cut-
off and reverse lockout
Shocks: Oil-filled with blue aluminum bodies
Body: 0.040" (1mm) thick painted and trimmed with SC10 Team AE trim
Differential: Sealed, planetary gear
Spur Gear: 87 tooth
Slipper Clutch: Dual sided, externally adjustable
Wheels: style, 3" (76mm) diameter, 1.6" (41mm) wide, black in
color
Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm)
diameter, 1.7" (43mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Bumpers: Front and rear with functional rear rubber mud flaps
Ball Bearings: 14 rubber sealed
Suspension: Fully adjustable with steel turnbuckles
Steering: Angled bellcrank "coplanar" steering with integral servo
saver
SC10 Short Course Race Truck Kit from Associated with tires, wheels,
painted body, motor, radio and instruction manual
Transmitter Batteries: Six AA-size
Battery: 6-cell stick pack with standard connector
Battery Charger: To match selected battery
Building and track equipment
Vehicle-
length: 21.6" (550mm)
width: 11.5" (293mm)
Track: 9.6" (245mm)
Weight: 4.6lbs (2080g)
Wheelbase: 12.9" (327mm)
Internal Gear Ratio: 2.6:1
Body-
Length 21.6" (550mm)
Width 11.5" (293mm) at front fenders, widest point
8.8" (224mm) at center section, narrowest point
height: 6" (153mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Transmission 1 DTXC1561
2 3/16 x 3/8" Transmission 1 DTXC1423
2 3/16 x 3/8" Idler Gear 1 DTXC1423
4 3/16 x 3/8" Rear Hubs 2 DTXC1423
4 3/16 x 3/8" Front Hubs 2 DTXC1423
jxs 09/27/13
ir/jxs
&