discontinued 1/10 Nissan Fairlady Z Ver Nismo Tt-01e Kit
This part is discontinued and we no longer carry it.
Description
This is the 1/10 scale electric powered, radio controlled,
Tamiya Nissan Fairlady Z version NISMO On-Road Car Kit.
Chassis: TT-01 type E with shock tower now molded separately from
the gear case covers and new upper deck with transponder mount
new A parts (Uprights) made of polycarbonate plastic material
new D parts (upper deck, motor cover and more) made of fiberglass-
reinforced nylon material
Drive: Four wheel shaft drive
Motor: 540 size with pre-attached leads
Electronic Speed Control: Tamiya TEU-101BK, TAMM3194
Lights: Tamiya TLU-01 (TAMC1394) LED light unit with four LED lights,
see COMMENTS
Shocks: Friction, not oil-filled, composite body
Gearbox: Sealed front and rear
Differentials: Bevel gear
Transmission: Single speed
Tires: Radial type 1.02" (26mm) wide, 2.48" (63mm) diameter
Wheels: 5-spoke silver plastic 1.02" (26mm) wide, 2.04" (52mm)
diameter
Body: Polycarbonate, requires trimming and painting
Bumpers: Foam front bumper
Suspension: Four wheel independent double wishbone
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering Tie Rods: Fixed non-adjustable, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
in relation to the chassis
Steering: Bell-crank TA-05 type with servo saver
Servo Saver: Included
Tamiya Nissan Fairlady Z, friction shocks, 540 motor, electronic
speed control, clear body, tires, foam bumper, wheels, 19 tooth
pinion gear, 61 tooth spur gear, instructions, LED light unit,
window mask and body trim decals
Radio: 2-channel with one steering servo
Battery: 6 cell stick pack with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery
VEHICLE-
Length: 17.1" (435mm)
Width: 7.5" (190mm)
Height: 5.5" (140mm)
Weight: 2.4lbs (1100g)
BODY-
Length: 16.6" (422mm)
Width: 6.7" (172mm)
Height: 3.8" (98mm)
The TLU-02 Light Control Unit (not included) can be installed for
more light effects, order TAMC1477.
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
12 5x11mm front & rear diff gears, hubs 6-DTXC1547
4 8X12mm front & rear diff gears 2-DTXC1597
Body pictured on the box is painted silver.
jxs 3/18/08
ir/jxs
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
COMMENTS:
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Additional details
Shipping weight
67.52 ounces
1914.28 grams
4.22 pounds
Package dimensions
6.00 x 9.13 x 19.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️