This is the electric powered 1/10 scale,
Tamiya Datsun 240Z On-Road Drift Spec Car Kit.
Chassis: TT-01D type E with shock tower now molded separately from
the gear case covers and new upper deck with transponder mount
new A parts (Uprights) made of polycarbonate plastic material
new D parts (upper deck, motor cover and more) made of fiberglass-
reinforced nylon material
Drive: Four wheel shaft drive
Electronic Speed Control: TEU-104BK with reverse, TAMM4541
Motor: 540 motor with pre-attached leads and blue aluminum heat sink
Lights: TLU-01 LED head and tail lights turn ON when car is switched
ON, see COMMENTS
Ball Bearings: Installed in differentials, bushings in wheel hubs
Shocks: Oil-filled, plastic body CVA Super Mini
Gearbox: Sealed, front and rear
Differentials: Bevel gear, ball bearing equipped
Transmission: Single speed
Body: Polycarbonate, clear
Tires: Super Driftech drift spec resin 1" (26mm) wide, 2.5" (63mm)
diameter
Wheels: Plastic, two sets, one with silver finish, one with polished
gunmetal gray, 2.0" (52mm) outer diameter, 0.94" (24mm) wide, +2
offset
Bumper: Front foam
Suspension: Independent double wishbone
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Bell-crank type with servo saver
Tamiya Nissan GT-R On-Road Drift Spec Car kit, 540 motor, ESC, clear
body, tires, foam bumper, spoke wheels, 19 tooth pinion gear, 61
tooth spur gear, LED light kit, decals and instructions
Radio: 2-channel with one servo
Radio Batteries: 8 AA size (for transmitter)
Battery: 6-cell stick pack with standard connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment
VEHICLE-
length: 17.4" (444mm)
width: 7.4" (187mm)
height: 5.2" (132mm)
Weight: Approx. 3.1lbs (1400g)
Wheelbase: 10" (251mm)
BODY-
length: 17.2" (438mm)
width: 7.2" (183mm) at rear wheels, widest point
height: 4" (102mm)
TLU-02 Light Control Unit (TAMC1477) can be added for greater control
of the lights
For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
12 5 x11mm front & rear diff gears, hubs 6 DTXC1547
4 8 X12mm front & rear diff gears 2 DTXC1597
Body shown on box is painted blue. To match the color scheme on the
box, use Tamiya Metallic Blue PS-16 (TAMR8616), and PS-5 Black
(TAMR8605).
jxs 02/21/11
ir/jxs
&