Transmission with DIG function enables a tighter turning radius by locking the rear axle for FWD power only.
Currie F9 Portal Axles increase ground clearance at the diff pumpkin for the best crawling performance.
Includes all-metal gears, from the center transmission to the lockers and portal axles.
Tube chassis design offers optimum clearance plus realistic scale looks.
All pivot points are on stainless steel balls for a durable, long-lasting suspension point.
Includes Nitto Trail Grapplers 1.9 Monster tires mounted on injection-molded, 3-piece, licensed Raceline beadlock wheels.
Adjustable oil-filled shocks feature hard anodized, threaded shock bodies and a single coilover spring.
All-metal front universal axles provide smooth action and 45 degrees of steering angle for an efficient, high-performance drivetrain.
Durable, machined aluminum universal.
540-size, 35T brushed motor with enlarged cooling ports delivers an even balance of speed and technical crawling.
Spektrum STX3 3-channel, 2.4GHz radio system and receiver operate the DIG feature along with other functions.
Axle-mounted servo improves steering control in full articulation.
Finely tuned suspension geometry delivers the best crawling capabilities.
Approximate Assembly Time: No assembly required
Ball Bearings: Full set
Batteries: Shorty configuration (sold separately)
Body: Separate panels, Polycarbonate, screen printed color scheme
Brakes: Integral with ESC
Bushing Material: Metal
Charger: Sold separately
Chassis: Injection molded tubular
Completion Level: Kit
Differential: Locked
Drivetrain: 4WD Shaft Drive
Final Drive Ratio: 37:1
Gear Pitch: 32-Pitch
Ground Clearance: 3" (76.2mm)
height: 8.25" (209.5mm)
Internal Gear Ratio: 5.14:1
length: 17" (431.8mm)
Max Battery
1.02 x 3.8 x 1.8" (26 x 98 x 47mm)
Motor Size: 540 35T
Pinion: 14T
Radio: Spektrum STX3 3-channel, SRX300 3-ch receiver
Servos: SX107 micro metal gear high torque steering servo, axle mounted for better steering in full articulation
Shock Type: Aluminum body, oil-filled, coil-over spring
Size/Scale: 1/10
Speed Control: Axial AE-5L to operate light bar, IC3 battery connector
Suspension: 4-link solid axle
Tire Compound: S30
Tire diameter: 4.7" (119mm)
Tire Tread: Nitto Trail Grappler
Track: Front and Rear, 8.75" (222.2mm) distance from outer edges of tires measured side-to-side
Vehicle Type: Scale 4x4 crawler kit
Water-Resistant: Yes
Weight: 4.5lbs (2.04kg)
Wheel diameter: 1.9" (48.26mm)
Wheel Hex Size: 12mm Hex
Wheel Type: Raceline 3-piece beadlock monster
Wheel width: 1" (25.4mm)
Wheelbase: 12.5" (317.5mm)
width: 10.25" (260.35mm)

When calling or writing, ask for AXI03000T1  1 in Manchester warehouse