Ezrun Max8 ESC
Scale - 1/8th
Brushed/ brushless - BL
Sensored/Sensorless - SL
Waterproof - WP
Cont. /Peak Current - 150A/950A
Input Voltage - 3-6S LiPo/9-18 Cells NiMh
BEC Output - Switch Mode:6V/7.4V6A
Wires & Connectors - Input Wires:
- Red-10AWG-200mm*1/Red-10AWG-150mm*1/Black-10AWG-150mm*1
Output Wires:
- Black-10AWG-200mm*3
Input Connectors - XT90
Output Connectors - 6.5mm Famale Gold Connectors (pre-soldered onto the PCB)
All the wire length above is the original length not the length you see from the outside. )
Fan Size - 30x30x10mm
Voltage Range - 5-7.4V
Powered by Powered by BEC
ESC Programing via SET Button on ESC - Supported
LED Program Box - Supported
LCD Program Box - Supported
WiFi Module - Supported
OTA Programmer - Supported
Program Port - FAN/Program Port
Firmware - Firmware Upgrade - supported
Size & Weight:
Size - 59.8x48.0x36.8mm
Weight - 174g
Applications - Motors
SL BL Motors/SD BL Motors(only in SL mode)
Vehicles - 1/8thTouring Car/Buggy/TrucK
KV Rating/T Count - 4S LiPo: KV3000;/6S LiPo: KV2400(40XX Series of Motors)
Ezrun Max LED Program Card
This LED program box is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC programming easy and quick.
Its compact, portable and very applicable for field use.
It works with the following HobbyWing products:
1.Platinum V1/V2 series & FlyFun V5 series of brushless aircraft ESCs.
2.XeRun series (some XeRun ESCs, please take the instructions of relevant user manuals as standard. ), EzRun series & QuicRun series of brushless car ESCs.
3.SeaKing series of brushless boat ESCs.
Size88x58x14mmLxWxH
Weight40g
Input Voltage: 4.8V8.4V(a separate battery is needed for powering this program box when ESC has no built-in/external BEC)
1x Ezrun 4274 SL brushless motor (2200kv)
Product Name - XERUN-4268SD-2200KV-G2
Product Number - 30401903
Type:
Scale - 1/8th
Brushed/ brushless - BL
Sensored/Sensorless - SD
Pole Count - 4
Relevant Parameters:
KV Rating - 2200
LiPo Cells - 2-6S
No-load Current(A) - 4.5
Size & Weight:
O. D. (mm) - 42(1.654in)
Length (mm) - 68(2.677in)
Shaft Diameter (mm) - 5.0(0.197in)
Weight (g) - 325g(11.464oz)
Front Bearing - D5*D16*t5 (NMB-R-1650HH)
Rear Bearing - D5*D11*t5
Shaft Length(mm) - 5.0(0.197in)
Other Parameters
Timing - 20-40 Degrees(Adjustable)
Also included
Supportive accessories (double side tape, etc)
Supportive parts
MAX8 ESC now comes with a factory-installed XT90 plug wired in series