FAZER Vei Cranberry Red Chevelle SS 454 LS6 1970
Description
The Fazer VEi is built for enthusiasts with beginner to intermediate skill levels. It features a hobby-grade chassis that is durable, customizable, and can be modified for any level of performance. More modern 4-wheel independent suspension soaks up the bumps with the assistance of oil-dampened coil-over shocks. Industry-standard 12mm hubs are use to fit the wheels, which makes the Fazer compatible with hundreds of types of wheels and tires made for cars of this scale. Ball bearings support the entire drive system, ensuring that the Chevelle runs as smooth and efficiently as possible. The Fazer also features a 4WD drivetrain to bridge the reality gap between the full size car and the RC version. The power-to-weight ratio of the RC version is considerably stronger than that of the real car, and as a result, a 2WD version of the car would be very difficult to control. The 4WD system handles almost everything you can throw at it, and then some. Its even ready for optional motors and ESCs that are much more powerful, and that will produce freakishly high speeds.
The Fazer VEi includes the Team Orion dDrive. This is an integrated power system that enhances the output of the 4-pole brushless motor by installing the Electronic Speed Controller inside the motor. By eliminated the wires that normally connect a standard motor to an external speed controller, it reduces resistance, which in turn increases power and efficiency. The entire package is powered by the included Team Orion 1800 mAh Ni-Mh battery (with a basic AC wall charger), but the dDrive system can handle aftermarket big capacity Li-Po batteries for longer, and noticeably more powerful performance if you think youre ready.
Chassis is fully factory assembled with a painted, trimmed and mounted body.
Syncro KT-231P 2.4 GHz radio system is included with a high-performance waterproof steering servo.
Sealed differentials and transmission delivers reliability and performance.
High performance 4-pole Team Orion Vortex dDrive system (Equivalent to 3000KV conventional motor)
Compatible with 2S LiPo batteries and pre-wired with a Super Connector.
Water-proof power system.
Aluminum motor/ESC case provides efficient cooling
Fully proportional steering and throttle control. No steps in the controls or choppy movement.
Overheat protection and battery low voltage cut-off systems.
1970 Chevy Chevelle body officially licensed by General Motors.
New "true-to-scale" body with detailed molded parts like front and rear grills, side mirrors, fuel cap, etc.
Designed to use an optional LED light set for the most realistic action at cruise night!
Includes Team Orion 1800 NiMh Battery pack and Kyosho wall charger
Features a longer wheelbase for more stability and improved scale appearance.
Onboard receiver is protected from dust and debris.
length: 19.3 in. (489mm)
width: 8.2 (207mm)
height: 5.4 in. (138mm)
Wheelbase: 10.8 in. (274mm)
Tread (F/R): 6.9 in. (174mm)
Tire Width : 1 in. (26mm)
Tire Diameter : 2.7 in. (68.5mm)
Weight Approx 3.75 lbs. (1700g)
Gear Ratio: 6.34:1
READYSET BOX CONTENTS:
Factory assembled chassis
Painted, trimmed and mounted body
Syncro KT-231P 2.4 GHz radio transmitter
Team Orion 1800 mAh Ni-MH battery pack
AC wall charger with international plug adapters (Do NOT use for Li-Po batteries)
REQUIRED FOR OPERATION:
Four (4) AA-size alkaline batteries for the radio transmitter
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
125.38 ounces
3554.35 grams
7.84 pounds
Package dimensions
8.00 x 10.00 x 26.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️