1/10 Bullet St 3.0 Nitro 4WD RTR
Part number
Real-time inventory
Price
This part is not currently in stock.
Description
HPI Racing brand radio controlled, glow powered, ready to run, 1/10 scale
Bullet ST 3.0 Stadium Truck from HPI.
rear skid plates and aluminum center brace
Drive: Four wheel sealed shaft drive
Radio: 2.4GHz with end point adjustments, dual rates,
servo reverse, waterproof SF-10W steering and throttle servos
Engine: Nitro Star G3.0 with pull starter, two stage air filter with
rain cover, two needle composite body slide valve carburetor, and
ABC liner construction, Aluminum piston with Brass cylinder
liner that is Chrome plated
Exhaust: Tuned aluminum pipe
Clutch: Two piece racing with 13 tooth steel clutch bell
Fuel Tank: 2.5oz (75cc)
Shocks: Eight oil-filled
Differentials: Bevel gear
Brake: Single drilled steel disc
Ball Bearings: Full set, rubber sealed
Body: Trimmed and painted
Suspension: Extra long arms with steel turnbuckle links
Slipper Clutch: Dual pad, adjustable
Spur Gear: 54 tooth plastic
Wheels: 5-spoke black chrome, 14mm hex, 2.2 (56mm) wide, 3.2
(82mm) diameter
Tires: HPI Ammunition all terrain 2.6 (67mm) wide, 4.8 (124mm)
diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Warranty: Two year limited beginning at date of purchase. Valid only
in US, Canada and South America. Not intended for use in the EU.
Radio, painted Body, 8 AA cells and Instruction Manual
Fuel bottle, glow starter, maintenance and track equipment
length: 16.4 (417mm)
width: 13.2 (336mm)
height: 6.3 (160mm) adjustable
Wheelbase: 10.7 (272mm)
Track: 10.3 (263mm) outer edges of tires side-to-side
Body;
length: 16.1 (409mm)
width: 6.7 (170mm)
height: 4.4 (112mm)
Qty. Size Location Qty. Bearing Set
2 10x15mm Spur Gear 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
2 5x10mm Clutch 1 DTXC1535
4 5x10mm Fr Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535
jxs 10/19/11
ir/jxs
Manufacturer information
HPI Racing assumes responsibility for it products and will repair or replace any defective product at its sole discretion. HPI believes it is solely responsible for its products, therefore, Hobby Etc., Inc. will not be involved in any replacements. Please contact HPI directly.<br><br>Contact HPI Customer Service for any product related problems at 949-753-1099. HPI Customer Service hours are Monday - Friday 8:00 to 4:30 PST. The HPI website, www.hpiracing.com, has information and frequently asked questions about HPI products.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
160.01 ounces
4536.20 grams
10.00 pounds
Package dimensions
20.75 x 14.70 x 7.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️