This is the 1/10 scale, brushless electric powered, 2.4GHz radio controlled,
RTR HPI On-Road Sprint 2 Flux Touring Car with the BMW M3 Body.
FEATURES:
Chassis: 3/16" (4mm) thick plastic
Drive: Four wheel belt drive
Motor: HPI Flux Vektor 5900kV brushless (not 3S LiPo compatible)
Radio: 2-channel HPI TF-11 2.4GHz, SF-10W waterproof steering servo
and four AA transmitter batteries
Electronic Speed Control: Waterproof HPI Flux Vapor, LiPo compatible
and fully programmable with the USB Programming Kit (not included)
Ball Bearings: Full set, rubber sealed
Shocks: Oil-filled, plastic bodied
Differentials: Planetary gear, sealed
Transmission: Single speed with Flux optimized gearing
Tires: HPI X-Pattern Racing Tire 1.02" (26mm) width, 1.9 (49mm)
diameter
Rear, 1.2" (31mm) width, 1.9" (48mm) diameter
Wheels: Six spoke black 1.9" (48mm) diameter, 1.02" (26mm) wide
Pinion Gear: Steel 48 pitch
Spur Gear: 48 pitch, composite construction
Body: Polycarbonate painted and trimmed with body trim and light
details and clear plastic windows
Bumpers: Front, foam
Suspension: Fully adjustable, extra long upper links with new
multiple mounting positions, and adjustable droop
Ackerman: Adjustable, Ackerman describes the effect of the inner
front wheel turning faster than the outer front wheel during turns
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bearing supported bell-crank type with servo saver
HPI On-Road Sprint 2 Touring Car with the BMW M3 Body, Flux
Vapor ESC, Flux Vektor 5900kV brushless motor, body, wing, 4 AA
TX batteries, 2.4GHz radio w/waterproof steering servo, decal
sheet, and instruction manual
_
REQUIREMENTS:
Battery: 7.2V NiMH stick pack with Dean's connector
Battery Charger: To match selected battery
Misc. Items: Building and track equipment
VEHICLE-
Length: 17" (431mm)
Width: 7.5" (190mm)
Height: 5" (127mm)
Weight: 2.7lbs (1245g)
Wheelbase: 10" (254mm)
Front Track: 7.4" (187mm)
Rear Track: 7.7" (196mm) side to side at outer edges of wheel
Front Tread: 6.3" (160mm)
Rear Tread: 6.6" (169mm) side-to-side at wheel centers
Ground Clearance: 0.35" (9mm)
BODY-
Length: 17.4" (441mm)
Width: 7.5" (190mm)
Height: 4.7" (120mm)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10mm Fr Wheels 2 DTXC1535
4 5x10mm Rear Wheels 2 DTXC1535
2 5x8mm Fr Diff 1 DTXC1523
2 5x8mm Rear Diff 1 DTXC1523
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
1 4x8mm Spur Gear Mount 1 DTXC1511
2 4x8mm Servo Saver 1 DTXC1511
2 4x8mm Middle Lay Shaft 1 DTXC1511
jxs 10/20/14
ir/jxs
&