Venom Lipo 3s 11.1v 5000mah 100c
Description
- 10AWG pretinned discharge leads without connector
- Charging bag
- Plug to match ESC
- Continuous Discharge: 100C (500A)
- Max Burst Rate: 100C (500A)
- Max Volts per Cell: 4.2V)
- Max Volts per Pack: 12.6V
- Min Volts per Pack: 9V
- Charge Rate: 1C (5A)
- Wire Gauge: 10 AWG Soft and Flexible Low Resistance Silicone Wire
- Watt Hours: 55.5
- Weight: 15.55 oz (440 g)
- ALWAYS use a LiPo Cell Balancer
- ALWAYS keep out of reach of children
- ALWAYS set charger to 3.7V per cell
- NEVER Charge over 4.20V per cell
- NEVER Charge at currents greater than 1C
- NEVER Trickle Charge
- NEVER allow to Discharge below 3.2V per cell
- NEVER disassemble or modify pack in any way or puncture cells
- NEVER place on combustible materials or leave unattended duringcharging
- ALWAYS Charge in a fireproof location
- ALWAYS set charger's output volts to match battery volts
Manufacturer information
customerservice@venom-racing.com All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
16.80 ounces
476.27 grams
1.05 pounds
Package dimensions
7.00 x 2.50 x 2.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️