AX90056 1/10 Wraith Spawn Electric 4WD Kit
Part number
Real-time inventory
Price
This part is not currently in stock.
Description
Axial Racing brand radio controlled, electric powered, 1/10 scale
Wraith Spawn Rock Racer Kit from Axial.
Chassis: Full tube composite construction with composite skidplate
Drive: Four wheel shaft with WB8 HD Wildboar 3-piece driveshafts
with captured cross pin design eliminating older set screw design
hardened steel universal joints increase steering angle by 10
over stock dogbone/drive cup setup
Axles: AR60 OCP (Off-Center-Pumpkin) high-strength composite design
Transmission: Steel output gears and dual slipper clutch equipped,
Differentials: Locked type with easy access for rebuilding and
maintenance
Suspension: Four link optimized to reduce axle steer, machined
aluminum lower suspension links reduce flex and provide precise
control over rough terrain
Shocks: Icon Vehicle Dynamics aluminum body
Receiver Box: Waterproof
Cockpit: Lexan interior with molded driver figure
Battery Tray: Sized for 6-cell 7.2V standard stick packs or 2S LiPo
pack up to 1.8 (47mm) wide, 5.9 (150mm) long, 1.1 (28mm) high
Tires: 2.2 (56mm) diameter Maxxix Trepador in S30 compound and
multi-stage staggered shoulder pattern for improved control, foam
inserts also included
Wheels: Three piece Method IFD 12 spoke beadlock with updated hub
adapter that uses standard 12mm hex
Body: Clear polycarbonate Wraith Spawn
Warranty: Axial warrants this kit to be free from defects in
materials and workmanship when new. This warranty does not cover
damages due to normal wear and tear, user's failure to perform
routine mantenance, user error of assembly or installation, user
modifications, addition of aftermarket parts or option parts.
Wraith Spawn Rock Racer kit with Cockpit, Tires, Wheels, Foam
Inserts, 56T Spur Gear, 12T Pinion Gear, Shocks, Body, Window Masks
Decals and Instruction Manual
Radio: 2-channel
Servo: High-torque, standard size
ESC: Axial AE-2 recommended
Motor: 540 size
Battery: 7.2V NiMh 6-cell stick pack or 7.4V 2S LiPo pack
Battery Charger: For selected battery type
AA Batteries: Four or eight depending on selected transmitter
Building and trail equipment
Vehicle;
Wheelbase: 13.9 (353mm)
width: 11.02 (280mm)
height: 9.1 (232mm)
length: 19.25 (490mm)
Ground Clearance: 2.8 (72mm)
Weight: 5.45lbs (2.47kg) with electronics
Body;
length: 18.1 (461mm)
width: 8.3 (211mm)
height: 6 (152.4mm)
Thickness: .040 (1.02mm)
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
160.00 ounces
4535.92 grams
10.00 pounds
Package dimensions
11.50 x 13.00 x 24.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️