AX90038 Yeti XL 4WD Kit
Part number
Real-time inventory
Price
This part is not currently in stock.
Description
This is the Radio Controlled, Electric Powered, 1/8 scale
4WD Yeti XL Rock Racer Kit from Axial.
**Additional Technical Info Will Be Added When It Becomes Available. **
braces for greater stiffness, multiple upper link positions to
adjust anti-squat
Drive: Four wheel shaft, AR60XL OCP solid rear axle, WB XL CVJ rear
driveshaft with captured cross pin design-no set screws to lose
front CVJ metal universals, adjustable steel turnbuckles
Shocks: Icon Vehicle Dynamics threaded aluminum Big Bore 16, dual
rate springs
Steering: Dual shear rack
Transmission: All metal gears, full ball bearings, single speed with
high gear installed, optional two-speed transmission component sold
separately
Slipper Clutch: Dual slipper design with aluminum pad on each side of
32P spur gear for right amount of slip, and heat resistance
Roll Cage: Y-480 flexible plastic, resembles welded steel tubes
Receiver Box: Waterproof, with three silicone seals (electronics not
included)
Weight Box: Black plastic styled to resemble a scale fuel cell, may
be used as an additional electronics box
Tires: Oficially licensed 3.8" (96mm) Falken WildPeak M/T S30
compound
Wheels: Officially licensed Raceline Monster wheels, 3.8" (96mm)
diameter, 17mm hexes
Front Suspension: Independent, maintains high-speed stability and
travel direction when encountering the roughest of terrain
Rear Suspension: 4-linked Long travel sway bar (medium 3.4mm),
3mm aluminum lower link plates
Body: Clear polycarbonate .040" (1mm) thick, with interior tray,
three driver helmets, decals, spare wheel and tire
3 Driver Helmets, Interior Tray, Spare Wheel and Tire, and
Instruction Manual
Steering Servo: Metal gear, high-torque
Power System: 1/8 scale brushless 4-pole
Batteries: Two 2S or 3S LiPo Packs with connector to match ESC, 25C
minimum discharge rating
Battery Charger: To match selected batteries
AA Batteries: Four for transmitter
LiPo charge bag, maintenance and trail equipment
length: 25.75" (654mm)
width: 16.3" (414mm)
height: 11.10" (282mm)
Wheelbase: 18.5" (470mm)
Ground Clearance: 2.48" (63mm)
Weight: 12.75" (5.78kg) including electronics
Body;
length: 23.5" (597mm)
width: 9.7" (247mm)
height: 6.8" (173mm)
Thickness: .040" (1.02mm)
Battery Tray Dimensions;
length: 6.89" (175mm)
height: 1.3" (33mm)
width: 1.7" (43mm)
2 10x16mm Front Diff 1 ASCC9832
2 10x16mm Rear Diff 1 ASCC9832
2 15x21mm Front Uprights 1 DTXC1601
2 8x16mm Front Uprights 1 DTXC1585
2 15x21mm Front Bulkhead 1 DTXC1601
2 15x21mm Rear Bulkhead 1 DTXC1601
2 8x16mm Rear Axle 1 DTXC1585
2 5x11mm Transmission 1 DTXC1547
2 8x16mm Transmission 1 DTXC1585
jxs 01/14/15
&
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
192.01 ounces
5443.44 grams
12.00 pounds
Package dimensions
7.00 x 17.00 x 31.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️