This is the Tamiya Radio Controlled, Electric Powered, 1/10 scale TRF101W Race Car Kit. **Additional Technical Info Will Be Added When It Becomes Available.** Chassis: Carbon fiber plate, 0.098", (2.5mm) thick carbon fiber lower deck Drive: Rear wheel, direct pinion to spur gear, solid axle drive line Differential: Aluminum housing, ball pressure plate, tungsten diff balls Suspension: Front independent, rear solid axle pivot ball link with 3 different side link attachment positions for fine adjustments, carbon fiber lower arms Shocks: TRF, Aluminum body, oil filled Motor Mount: Aluminum Wheel Hubs: Aluminum clamp type Steering: Direct servo, with aluminum servo mount Servo Saver: High-torque with aluminum horn Spur Gear: 04 module, 96T Ball Bearings: Full set, flourine coated Battery Compartment: Compatible with square and shorty packs Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle TRF101W Race Car Kit, Decal Sheet, Shocks, Shock Oil, Spur Gear, Radio: 2-channel with high-speed steering servo Motor: Brushless recommended ESC: To match selected motor Pinion Gear: 04 module Tires and Wheels: F103 Foam or F104 rubber tires Body, building and track equipment Dimensions such as finished size not provided by manufacturer Track Width w/F103 Foam Tires: 7.8" (198mm) front and rear w/F104 Rubber Tires: 7.8" (198mm) front, 7.1" (180mm) rear For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 1 5x11mm Differential 1 DTXC1547 1 8x12mm Differential 1 DTXC1581 2 6x10mm Rear Shaft 1 DTXC1561 4 5x10mm Front Hubs 2 DTXC1535 jxs 08/11/14 ir/jxs &