Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

Crusher/4PHD 4-Pole 4x4 SCT Brushless System

This part is discontinued and we no longer carry it.

Manufacturer

Novak logo

Part number

NOV3087

Real-time inventory

Out of stockClick to refresh

Price

$369.98
Sale -$129.99
$239.99

This part is discontinued and we no longer carry it.

Description


Novak brand Novak Crusher/4PHD 4-Pole SCT Brushless System 2S
Novak has paired the updated Crusher speed control with the new Novak
4PHD 4600Kv 4-Pole sensor-based motor, making the perfect combo for
heavy-duty 4X4 applications. Novak's 4PHD motor provides massive power
and torque. Heavy loads, hard throttle and tough conditions are handled
with ease. Novak's rugged, purely sensor-based Crusher ESC, with its new
Simple Tuner interface, will provide crisp and smooth throttle response.
With added features like complete on-board programming, sealed case,
auto-detect LiPo cutoff, dynamic timing, ESC thermal protection, and a
rebuildable motor, the Crusher/4PHD 4-Pole 4X4 SCT Brushless System is
a great blend of performance and easy-to-use features that is ready to
power your project today.
FEATURES:
Includes Novak's multi-function Crusher ESC and heavy-duty 4PHD
4-Pole brushless motor ideal for 4x4 short course/monster
trucks and heavy-duty setups on 2S
Sensor-based system for excellent torque and low-speed drivability
ESC includes four customizable profiles: Three Standard pre-loaded
profiles(Bashing, Racing, Timing Test) and one Crawling profile
with crawling modes active (Rock Boost, instant reverse, and
hill/hold/drag brake)
Extreme-duty, built-in 5A BEC to handle the demands of today's
high-powered servos
Novak X-Drive firmware for unmatched throttle response and control
Novak Dynamic Timing Advance for increased motor RPM
The original, Novak-developed, One-Touch Set-Up for quick and easy
transmitter set-up
Quick and easy on-board programming (no external device needed) with
Simple Tuner Interface:
Brake Tuning: Brake Frequency, Drag Brake, Minimum Brake,
Brake Power
Drive Tuning: Dynamic Timing (0-35 deg), Timing Range (Low-High),
Drive Frequency,& Minimum Drive
Additional Tuning: Reverse, Dead Band, Voltage Cutoff (Off/Lipo),
Motor Rotation, Data Reset
Durable ESC design with sealed case, cooling fan and replaceable wire
included
Completely serviceable and rebuildable sensor-based brushless motor
Auto-detect LiPo Cutoff and ESC Thermal Overload Protection
On-board diagnostic temperature monitoring that lets you quickly
check the ESC's temperature at anytime
On-board Hall Sensor Test to easily and quickly verify that the
motor's sensors are working properly
Meets RoHS compliance and includes 120-Day Warranty
Designed and 100% tested by Novak in Lake Forest, Calif., using
globally-sourced components
The Novak 4PHD is also completely serviceable and rebuildable. At the
track, service and repairs are a snap and you will be back to
turning laps right away. Replaceable sensor harness(available in
several lengths), replaceable rotor, and replaceable bearings are
available. You will be back in action in no time!
Novak takes pride in its facility in Lake Forest, California and also
With its use of high-quality components and assembly and testing
processes. Each Novak Crusher ESC and 4PHD 4-Pole Brushless
Motor is tested in the Novak factory to Novak's exacting standards.
All Novak products are supported by Novak's knowledgeable
customer support staff and race team.
YOU WILL RECEIVE:
4PHD 4600Kv 4-Pole sensor-based motor and Crusher Brushless ESC
SPECIFICATIONS:
CRUSHER ESC
Motor Type Sensored Brushless [540, 550, 4-Pole, Novak Crawling]
Forward / Brake / Reverse (OFF/ON)
Forward / Drag Brake / Reverse (Crawling Mode)
2-4S LiPo cells/4-14 NiMH*
Size (in/mm) 1.16 x 1.47 x 0.96 (29.5 x 37.3 x 24.4 mm)
Weight (oz/g) 1.42 oz. (40.4 g)
On-Resistance 0.00040 ohms @ 25°C trans. temp. (brushless)
Motor Limit:
(2S) 540-size: 6.5-turn or higher (13.5T or higher crawler)
550-size: 4.5-turn or higher; 4-Pole: 4600Kv or lower
(3S) 540-size: 13.5-turn or higher (18.5T or higher)
550-size: 6.5-turn or higher; 4-Pole: 3500Kv or lower
(4S) 540-size: 13.5-turn or higher (18.5T or higher)
Not recommended for 550-size or 4-pole motors
BEC (volts / amps) 6.0 volts DC / 5.0 amps
(external BEC required for 3S/4S setups)
Wire Size (GA) 14G Super-Flex Copper-Strand Silicone Wire
*LiPo recommended for performance setups and
when using Dynamic Timing Advance/Rock Boost
4PHD 4 POLE MOTOR
Motor Size 2.62 x 1.41 (66.5L x 35.9D mm)
Weight 8.6oz. (245g) with 6 12AWG power wires
Input Voltage 2S LiPo (8.4 VDC)
Shaft Diameter 5mm
Shaft Length 0.58 (14.7mm)
Kv (unloaded) 4,600 RPM/volt
Design Sensored
Magnet 4-pole, Sintered Neodymium
Mounting 25mm ø (M3x0.5; M4x0.7)
DCW 8/21/14

Manufacturer information

Novak logo

Novak

17032 Armstrong Avenue

Irvine, CA 92614

https://www.teamnovak.com/

All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers. Novak (not Hobby Etc., Inc.) guarantees this to be free from defects in materials and workmanship for a period of 120 days from the date of purchase.

Additional details

Shipping weight

17.12 ounces

485.37 grams

1.07 pounds

Package dimensions

2.00 x 4.50 x 7.00

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️