Novak brand Novak Crusher Brushless 2S-4S Electronic Speed Control
updated with Simple Tuner Firmware and the Ballistic 6.5T Brushless Motor.
FEATURES:
Crusher ESC, NOVM1834
Rugged performance for 2S-4S rock crawling, rock racing, trail
hauling, short course, and non-racing go fast setups
Compatible with 540 and 550-size sensored brushless motors
Power Hill/Hold Brakes for extreme holding power during crawling
Auto-detect driving profile - crawling and extreme sport
Dynamic Timing Advance for increased RPM
Novak X-Drive provides enhanced throttle response, smooth power
delivery, higher top speeds, and cooler operating temperatures
Simple Tuner includes four, pre-loaded profiles for each of the
most popular applications. Each profile is 100% customizable
Profile #1 BASHER-Standard modes w/reverse, default profile &
ready for action
Profile #2 SPORT-Standard modes w/no reverse. Defaults set w/
no timing for blinky mode racing. Great starting profile for
club & spec racing
Profile #3 TIMING TEST-Standard modes of operation w/preset
mild timing level & low power brakes, ideal for speed run
testing
Profile #4 CRAWLING Rock crawling features enabled when used w/
Novak rock crawling brushless motor-powered hill/hold brakes,
instant reverse & Rock Boost
5A BEC for today's high powered servos
On-board diagnostic temperature monitoring, and thermal overload
protection
One-Touch Set-Up for quick transmitter setup
Gold plated wiring tabs for flexible soldering options
Ballistic 6.5T Brushless Motor
ROAR approved for 4WD Short Course racing
Extra long stator and rotor magnet delivers twice the torque of an
equivalent 540 motor
Sensor-based for excellent torque and low-speed driveability
Completely rebuildable with interchangeable stator construction that
allows easy experimentation at the track and reduced racing costs
Nickel-plated sintered Neodymium rotor with 5mm pinion shaft that
accepts all existing pinion gears
Adjustable timing to help retain previous settings
120 limited warranty on both components through Novak beginning at
date of purchase
YOU WILL RECEIVE:
Crusher Brushless 2S-4S ESC, with Cooling Fan, Heat Sink, 14G Power
Wires, Instructions, Ballistic 6.5T Brushless Motor w/Sensor Wire
SPECIFICATIONS:
Crusher ESC;
Motor Type: Sensored Brushless (540, 550, 4-Pole, Novak Crawling)
Motor Limit:
Brushless 2S: 6.5-turn or higher 540-size (13.5-turn or higher Novak
Crawler); 4.5-turn or higher 550-size; 4600kV or lower 4-pole
Brushless 3S: 13.5-turn or higher 540-size (18.5-turn or higher Novak
Crawler); 6.5-turn or higher 550-size; 3500kV or lower 4-pole
Brushless 4S: 13.5-turn or higher 540-size (18.5-turn or higher Novak
Crawler); Not recommended for 550-size or 4-Pole motors
Fwd/Brk/Rev: Standard Mode: Forward/Brake/Reverse (OFF/ON)
Crawling Mode: Forward/Drag Brake/Reverse
Input Cells: 2-4S LiPo, 4-14 NiMH
(LiPo recommended for performance setups, and when using RPM boost
timing)
BEC: 6.0V/5.0 amps (external BEC required for 3S/4S setups)
Dimensions: 1.16 x 1.47 x 0.96 (29.5 x 37.3 x 24.4mm)
Weight: 1.42oz. (40.4g)
On Resistance: 0.00040 ohms @ 25°C trans temp (brushless)
Wire Size: 14G Super-Flex Copper-Strand Silicone Wire
Ballistic 6.5T Brushless Motor
Input Voltage: 2-4S LiPo
Kv (unloaded): 3,400RPM/Volt
Watts: 730
Magnet: One-piece multi-pole Neodymium
Motor Size: 2.84 x 1.41 (72.1 x 35.8mm)
Motor Weight: 10.1oz. (286.3g)
Shaft Diameter: 5mm
jxs 07/16/14
ir/jxs