HPI Racing brand Electric Powered, 2.4GHz Radio Controlled, 1/8 Scale,
Ready to Run WR8 Flux Ken Block F0RD Fiesta Rally Car from HPI.
**Additional Technical Info Will Be Added When It Becomes Available.**
FEATURES: Chassis: 0.12 (3mm) thick silver anodized aluminum with composite
front and rear braces and plastic side dirt guards
Drive: Four wheel shaft
Radio: HPI 2.4GHz
waterproof analog steering servo
Motor: Flux Vektor 4000kV brushless
ESC: Flux Vapor Pro with reverse, cooling fan and fully programmable
with the #100573 Castle Link USB Programmer, HPIC0573 (not
included)
Differentials: Three, adjustable bevel gear type, oil filled
Shocks: Oil-filled, composite body with rear mud guards
Suspension: Front and rear sway bars, composite lower suspension arms
and solid upper links
Tires: Scale Michelin Tarmac Rally, 1.4 (35mm) wide, 3.1 (80mm)
diameter
Wheels: Blue in color, 1.4 (35mm) wide, 2.2 (56mm) diameter,
12mm hex size
Ball Bearings: Full set
Pinion Gear: 15 tooth
Spur Gear: 46 tooth composite
Body: Trimmed and painted with all sponsor decals applied
Bumper: Front foam with plastic raised skidplate that allows car to
slide over objects in the road
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-Adjustable camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited through manufacturer, valid only in USA,
Canada and South America
YOU WILL RECEIVE: HPI RTR WR8 Flux Ken Block F0RD Fiesta Rally Car with 2.4GHz Radio
System, ESC, Brushless Motor, Body, 4 AA cells for Transmitter and
Instruction Manual
REQUIRES: LiPo Battery: 2-3S LiPo with at least 25C rating and 3500mAh and
Deans Female plug
Battery Charger: Compatible with selected battery
LiPo Charging Bag
Building and track equipment
SPECS: Vehicle-
Length: 19.1 (485mm)
Width: 8.9 (227mm)
Height: 6.8 (172mm)
Wheelbase: 11.8 (300mm)
Body-
Length: 18.9 (480mm)
Width: 8 (203mm) behind front wheels, narrowest point
9.1 (232mm) at rear wheels, widest point
Height: 6 (153mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 5x10mm Front Hubs 2 DTXC1535
4 5x8mm Rear Hubs 2 DTXC1523
6 10x15mm Differentials 3 DTXC1595
2 5x10mm Front Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
jxs 02/06/14