Tekin brand Tekin RSX Sensored/Sensorless Electronic Speed Control.

Operates brushed or brushless, sensored or sensorless motors
LiPo safe with custom voltage cutoffs
HotWire PC programming port (Hotwire not included & must be purchased
separately, TEKM1451)
Datalogging capability
D2 Dual Drive Mode technology
On-board temperature indicator
Sensor plug for precise commutation with all motors
High speed fan for maximum cooling
Programming features include;
High voltage 6.0/7.4V BEC (battery eliminator circuit)
13 step drag brake/brake/reverse strength
Current limiter (none + 12 steps)
Neutral width (13 steps)
Timing Profiles (5 preset - 2 custom)*
Adjustable throttle and brake minimums
Custom throttle curves
Motor/Reverse Type: brushless, Brushed, No Rev, Rev Delay
Voltage cutoffs (none, 2S, 3S, Custom)
Timing Boost and Turbo when used with Hotwire
ROAR Race Spec Blinky Mode
Save, Load and Share data log and custom ESC setup files*
*Requires Hotwire (sold separately)

RSX ESC with Fan, two Zip Ties, Capacitor, 12AWG Motor Wires, On/Off
Switch, Receiver Connector and Instructions

Input Voltage: 4-9 Cells, 2S-3S LiPo
BEC: 6.0V/7.4V, 5.5amps
Motor Limit brushless Mode 2S: 2.5 Turn 2-pole, 4lb chassis
Motor Limit brushless Mode 3S: 8.5 Turn 2-pole, 4lb chassis
Motor Limit Brushed 2S: 6 Turn, 36mm Can
Motor Limit Brushed 3S: 12 Turn, 36mm Can
Max Current: 180amps per phase
Timing Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
1.22 x 1.46 x .82 (31.2 x 37.2 x 21mm)
Weight: 1.5oz (42g)
jxs 02/14/14
ir/jxs