This is the Tekin RS Gen 2 Spec D2 Brushless Electronic Speed Control
and Tekin Gen 2 Redline 17.5 Turn Brushless Motor.
FEATURES
RS Gen 2 Spec D2 ESC (TEKC1155);
Compatible with sensored, sensorless, brushless, and brushed motors
True ROAR spec mode only, no timing or boost features available
High voltage programmable Battery Eliminator Circuit (BEC)
HotWire PC interface for advanced programming and updating, EZ access
programming port (HotWire Interface (TEKM1450), and Gen 2 Adaptor
(TEKM3825) required)
Forward, brake, and reverse operation
D2 Dual Drive Mode technology
On-board temperature indicator
Sensor plug for precise commutation with all motors
Gold plated solder posts
Pit tune mode
HDAC: High Density Copper PCB's
Self test diagnostics and factory reset
DGF2 Digital Glitch Filtering V2
QuickTune programming with one-touch radio calibration
17.5T Redline Gen2 Motor (TEKC2405);
Specifically designed for 1/12 scale 1S LiPo and stock racing
Legal in major governing racing bodies
Dual plug sensor wire harness for all sensored and sensoreless
systems
CNC machined T 6061 billet aluminum heatsink can with anodized
endbell plates
High RPM precision bearings
High purity copper windings
Adjustable timing
Neodimium sintered magnet
120 day limited warranty through Tekin on both components beginning
at date of purchase
INCLUDES
RS Gen 2 Spec D2 Brushless ESC with Instructions, Motor and Receiver
Wires, Gen 2 Redline 17.5 Motor with Instructions, Capacitor,
two Zip Ties, two Mounting Pads
SPECIFICATIONS
ESC
Input Voltage: 4-7 cells, 2S LiPo
BEC: 6.0V, 3.7amps
Brushless Mode Motor Limit: 13.5 turn, 540 2-pole (36mm)
Brushed Mode Motor Limit Forward Only: 20 turn silver can
Brushed Mode Motor Limit Reverse: 20 turn silver can
Max Current: 120amps per phase
Timing Profiles: 7 choices on-board
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
1.0 x 1.3 x .51" (25.4 x 33 x 12.9mm)
Weight: .80oz (22.5g)
Motor
Weight: 6.2oz (177g)
Shaft 1/8 x 0.60" (3.2 x 15.3mm)
Motor Diameter: 1.40" (35.85mm)
Motor Length: 2.03" (51.8mm)
Bearing front: 4x13x5mm rear: 1/8x3/8x5/32"
kV: 2400
Rotor: 12.5mm