1/10 Subaru BRZ TT01D Type-E Drift Spec Kit

Description

This is the electric powered 1/10 scale
Tamiya 1/10 Subaru BRZ TT01D Type-E Drift Spec Kit

FEATURES:

Chassis: Plastic bathtub TT-01D design
Drive: Four wheel shaft drive
Electronic Speed Control: TEU-101BK with reverse
Motor: 540 motor with pre-attached leads
Lights: LED head and tail lights turn ON when car is switched ON,
see COMMENTS
Ball Bearings: Installed in differentials, bushings in wheel hubs
Shocks: Friction, plastic body CVA Super Mini
Gearbox: Sealed, front and rear
Differentials: Bevel gear, ball bearing equipped
Transmission: Single speed
Body: Clear untrimmed .03" (.8mm) thick polycarbonate
Tires: Super Driftech drift spec resin and rubber construction for
long lasting drift action
Wheels: Brushed chrome finish 2.0" (52mm) outer diameter, 0.94"
(24mm) wide +2 offset
Bumper: Front foam
Suspension: Independent double wishbone
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Fixed non-adjustable, caster/toe-in refers to the angle of
the front suspension when viewed from the side of the car in
relation to the chassis
Steering: Bell-crank type with servo saver

YOU WILL RECEIVE:

Tamiya 1/10 Subaru BRZ TT01D Type-E Drift Spec Kit, 540 motor, ESC
clear body, tires, foam bumper, spoke wheels, 19 tooth pinion gear,
61 tooth spur gear, decals and instructions

REQUIREMENTS:

Radio: 2-channel with one servo
Radio Batteries: 8 AA size (for transmitter)
Battery: 6-cell flat pack with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery
Misc. Items: Polycarbonate safe paint, building and track equipment

SPECIFICATIONS:

VEHICLE-
length: 17.4" (444mm)
width: 7.4" (187mm)
height: 5.2" (132mm)
Weight: Approx. 3.1lbs (1400g)
Wheelbase: 10" (254mm)
BODY-
length: 17.7" (450mm)
width: 6.8" (173mm) behind front wheels, narrowest point
7.6" (193mm) at rear wheels, widest point
height: 3.6" (92mm)

Manufacturer information

Tamiya

2 Orion

Aliso Viejo, CA 92656-4200

https://www.tamiyausa.com/

All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.