This is the Tekin RS Gen 2 brushless Electronic Speed Control.
Compatible with sensored, sensorless, brushless, and brushed motors
High voltage programmable Battery Eliminator Circuit (BEC)
HotWire PC interface for advanced programming and updating, EZ access
programming port (HotWire Interface (TEKM1450), and Gen 2 Adaptor
(TEKM3825) required)
Forward, brake, and reverse operation
D2 Dual Drive Mode technology
On-board temperature indicator
Sensor plug for precise commutation with all motors
Gold plated solder posts
Pit tune mode
Self test diagnostics and factory reset
DGF2 Digital Glitch Filtering V2
QuickTune programming with one-touch radio calibration
120 day limited warranty through Tekin beginning at date of purchase
RS Gen 2 brushless ESC with Instructions, Motor and Receiver Wires
Input Voltage: 4-9 cells, 2S-3S LiPo
BEC: 6.0V/7.4V, 5.5amps
brushless Mode Motor Limit: 8.5 turn, 540 2-pole (36mm)
Brushed Mode Motor Limit Forward Only: 10 turn
Brushed Mode Motor Limit Reverse: 12 turn
Max Current: 120amps per phase
Timing Profiles: 7 choices on-board
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
1.0 x 1.3 x .51" (25.4 x 33 x 12.9mm)
Weight: 2.0oz (48g) with wiring
jxs 05/02/13
ir/jxs
&