1/10 SC10RS Hart/Huntington RTR LiPo Combo
Description
Associated brand electric powered, 2.4GHz radio controlled, 1/10 scale, ready to run
SC10 RS (Race Spec) Short Course Race Truck
with Hart and Huntington Body Trim from Associated.
New upgrades from the previous version (#7044) include;
**High-Power Water-Resistant XP SC700 brushless Speed Control with Deans**
Ultra Plug battery connector
**Water-resistant enclosed receiver box**
**Blue anodized aluminum V2 coil-over shocks**
**Includes a LiPo battery and AC/DC Balancing Charger. **
hinged battery hold down strap fits NiMh and LiPo battery packs
Drive: Rear wheel with steel rear dogbone drive shafts
Motor: Associated Reedy 3300kV brushless
Radio: Associated XP3-SS 2.4GHz 3-channel system with metal gear
steering servo
ESC: Associated XP SC700 brushless compatible with LiPo cutoff and
Deans Ultra Plug battery connector
Shocks: V2 oil-filled with blue aluminum bodies
Body: 0.040 (1mm) thick painted and trimmed
Spur Gear: 87 tooth
Slipper Clutch: Dual sided, externally adjustable
Wheels: style, 3 (76mm) diameter, 1.6 (41mm) wide, black in
color
Tires: Multi terrain scale with reinforced sidewalls, 4.25 (108mm)
diameter, 1.7 (43mm) wide
Battery: #730 Reedy WolfPack (ASCC0730) 2S 7.4V 3000mAh with Deans
connector
Battery Charger: #604 (ASCP0604) Reedy 526-S AC/DC balancing charger
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis, includes Factory Team Arm Mounts (ASCC7487) that allow
four choices of rear toe-in for different track conditions
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Bumpers: Front and rear with functional rear rubber mud flaps
Ball Bearings: 14 rubber sealed
Suspension: Fully adjustable with steel turnbuckles
Steering: Angled bellcrank coplanar steering with integral servo
saver
ESC, painted body, brushless motor, 2.4GHz radio, instruction
manual, LiPo Battery, and AC/DC balancing charger
Building and track equipment
length: 21.6 (550mm)
width: 11.5 (293mm)
Track: 9.6 (245mm)
Weight: 4.6lbs (2080g)
Wheelbase: 12.9 (327mm)
Internal Gear Ratio: 2.6:1
Body-
Length 21.6 (550mm)
Width 11.5 (293mm) at front fenders, widest point
8.8 (224mm) at center section, narrowest point
height: 6 (153mm)
Qty. Size Location Qty. Bearing Set
2 6x10mm Transmission 1 DTXC1561
2 3/16 x 3/8 Transmission 1 DTXC1423
2 3/16 x 3/8 Idler Gear 1 DTXC1423
4 3/16 x 3/8 Rear Hubs 2 DTXC1423
4 3/16 x 3/8 Front Hubs 2 DTXC1423
jxs 05/16/13
ir/jxs
Manufacturer information
Associated prefers to deal direct with customers on questions of warranty and returns. Please contact Associated directly regarding such issues. All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
182.00 ounces
5159.61 grams
11.38 pounds
Package dimensions
9.50 x 14.00 x 28.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️