Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

discontinued 1/10 Rs Gen2 Esc 21.5 Gen2 Sensored Bl Motor Sys

This part is discontinued and we no longer carry it.

Manufacturer

Tekin logo

Part number

TEKTT2421

Real-time inventory

Out of stockClick to refresh

Price

$405.00
Sale -$186.01
$218.99

This part is discontinued and we no longer carry it.

Description

FEATURES:
RS Gen 2 ESC (TEKM1154);
Compatible with sensored, sensorless, brushless, and brushed motors
High voltage programmable Battery Eliminator Circuit (BEC)
HotWire PC interface for advanced programming and updating, EZ access
programming port (HotWire Interface (TEKM1450), and Gen 2 Adaptor
(TEKM3825) required)
Forward, brake, and reverse operation
D2 Dual Drive Mode technology
On-board temperature indicator
Sensor plug for precise commutation with all motors
Gold plated solder posts
Pit tune mode
Self test diagnostics and factory reset
DGF2 Digital Glitch Filtering V2
QuickTune programming with one-touch radio calibration
21.5 Redline Gen2 Motor (TEKC2403);
Specifically designed for 1/12 scale 1S LiPo and stock racing
Legal in major governing racing bodies
Dual plug sensor wire harness for all sensored and sensoreless
systems
CNC machined T 6061 billet aluminum heatsink can with anodized
endbell plates
High RPM precision bearings
High purity copper windings
Adjustable timing
Neodimium sintered magnet
120 day limited warranty through Tekin beginning at date of purchase
YOU WILL RECEIVE:
RS Gen 2 Brushless ESC with Instructions, Motor and Receiver Wires
21.5 Redline Gen2 Motor with Sensor Wire
SPECIFICATIONS:
ESC;
Input Voltage: 4-9 cells, 2S-3S LiPo
BEC: 6.0V/7.4V, 5.5amps
Brushless Mode Motor Limit: 8.5 turn, 540 2-pole (36mm)
Brushed Mode Motor Limit Forward Only: 10 turn
Brushed Mode Motor Limit Reverse: 12 turn
Max Current: 120amps per phase
Timing Profiles: 7 choices on-board
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
DIMENSIONS:
1.0 x 1.3 x .51" (25.4 x 33 x 12.9mm)
Weight: 2.0oz (48g) with wiring
21.5T Redline Gen2 Motor;
Weight: 6.2oz (177g)
Shaft
DIMENSIONS:
5 x 15.3mm
Motor Diameter: 1.40" (35.85mm)
Motor Length: 2.03" (51.8mm)
Bearing
DIMENSIONS:
front: 4x13x5mm rear: 1/8x3/8x5/32"
kV: 2200
Rotor: 12.5mm

Manufacturer information

Tekin logo

Tekin

165 Commerce St.

McCall, ID 83638

https://www.teamtekin.com/

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

TEKC2421
706893024214
0706893024214

Additional details

Shipping weight

9.60 ounces

272.17 grams

0.60 pounds

Package dimensions

1.85 x 4.65 x 5.50

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️