1/10 scale, electric powered, radio controlled
Ferrari F2012 F104 On-Road Racing Car kit from Tamiya.
Chassis: F-104 0.12" (3.2mm) thick composite fiber glass, 0.079" (2mm) thick composite fiber glass upper
deck
Drive: Two wheel direct
Motor: 540 type
Differential: Ball type with aluminum housing
Ball Bearings: Full set
Body: Clear, untrimmed with separate front and rear wing, side pontoons and molded white driver helmet
Steering: Isometric steering rods links with longitudinally mounted steering servo position
Suspension: Front, kingpin coil with spacers for ground clearance adjustment, Rear, T-bar with carbon friction plate and friction shock
Tires: Rubber slicks, front 1.2" (30mm) wide, 2.4" (62mm) diameter
rear 1.3" (33mm) wide, 2.4" (62mm) diameter
Wheels: Black, front 1.8" (45mm) diameter, 1.2" (30mm) wide rear 1.8" (45mm) diameter, 1.4" (35mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable by changing upper suspension mount installation
Tamiya F104 Pro On-Road Racing Car kit, tires, wheels, motor, 06
module 63 tooth spur gear, decals, body, friction shock,
instruction manual, and 17 tooth pinion gear
Radio: 2-channel, small ESC and receiver recommended, standard servo
Radio Batteries: Eight AA
Battery: 6-cell stick pack with Tamiya type connector
Battery Charger: Peak type recommended
Building and track equipment
Vehicle-
length: 16.4" (417mm)
width: 7.2" (183mm)
height: 3.9" (99mm)
Wheelbase: 10.6" (270mm)
Weight: 28.4oz (805g)
Body-
length: 15" (381mm)
width: 5" (128mm) at widest point
height: 2.7" (70mm)



description revised by: DB March 20, 2013