RC10B4.2 Factory Team Kit
Description
Associated brand 1/10 scale electric powered, radio controlled,
Associated RC10 B4.2 Factory Team off-road buggy kit.
**Additional Technical Info Will Be Added When It Becomes Available. **
Drive: Two wheel with CVA drive shafts with pin retainer clips with
steel center-drilled front axles
Transmission: 2.6:1 laydown type, high-torque capacity with VTS
slipper clutch (variable torque, multi-plate slipper with 3 drive
surfaces)
Ball Bearings: Full set, 14 rubber sealed
Shocks: Factory Team 12mm Big Bore hard anodized aluminum with TiN
Gold 3mm shock shafts
Shock Towers: Optimized for the Big Bore shock
Motor Plate: Factory Team blue aluminum milled construction
Differentials: Ball type with light weight outdrives
Spur Gear: Plastic, 81 tooth, 48 pitch
Wheels:
Wheel Hexes: Factory Team front and rear 12mm blue aluminum clamping
type
Body: ProLine Bulldog
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes
the angle of the front tires as viewed from the top
Suspension: Optimized for use with LiPo batteries, mounts for 4,
3.5, 3, and 2.5 rear toe
Turnbuckles: Factory Team blue anodized titanium turnbuckles
Front axles: Steel center drilled
Steering: Factory Team aluminum bellcrank,
Servo saver: Built-in with aluminum servo saver bolt and heavy duty
spring
Battery Strap: Carbon fiber with blue aluminum thumb screws
Vortex body with wing, decals, tires, wheels, shock oil and
instruction manual
Radio Batteries: (8) AA size
Pinion Gear: Number of teeth to be determined by motor
Motor: 540 size for buggy applications
Battery: 6-cell NiMh with standard connector OR 2S LiPo battery
Battery Charger: To match selected battery
Building and track equipment
length: 15.16 (385mm)
width:
Weight: 3.4lbs (1530g) running weight will vary depending on parts
installed
Wheelbase: 11.1 (281mm)
Internal Gear Ratio: 2.6:1
Body:
length: 11.3 (287mm)
width: 5.5 (140mm)
height: 2.9 (73mm)
afF0RDable upgrade for this vehicle.
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3/16x3/8 Transmission 2 DTXC1423
2 10x16mm Transmission 1 ASCC9832
2 3/16x3/8 Rear Hubs 1 DTXC1423
2 .187x0.50x.196 Rear Hubs 1 ASCC7935
4 3/16x3/8 Front Hubs 1 DTXC1423
jxs 01/18/13
Manufacturer information
Associated prefers to deal direct with customers on questions of warranty and returns. Please contact Associated directly regarding such issues. All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
57.60 ounces
1633.03 grams
3.60 pounds
Package dimensions
5.25 x 9.50 x 16.50
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️