Slash 4x4 Platinum with Low Cg Chassis LCG
Part number
Real-time inventory
Price
This part is discontinued and we no longer carry it.
Description
1/10 scale TRA Slash 4x4 Platinum Edition Short-Course Racing Truck.
The differences between this version and the 6804 are a new Low CG Chassis
and GTR High Volume Shocks on the 6804R.
Requires transmitter, receiver, batteries, charger
and paint for the body.
Drive: Four wheels of chassis
Electronic Speed Control: TRA VXL-3S waterproof, with high-
current connector, training mode, reverse and low voltage
detection for use with 2S and 3S LiPo packs
Motor: TRA Velineon 3500 with ultra high temperature
Neodymium magnets and high speed ball bearings
Spur Gear: 45 tooth
Pinion Gear: 31 tooth 48 pitch, extra pinion gear included for 50+
MPH operation with extra battery
Body: Clear polycarbonate with overspray film and window masks
Bumpers: Front and rear, composite construction
Shocks: Hard anodized oil-filled aluminum body GTR with PFTE coated
13mm bores and titanium nitride shafts for smooth, consistent
damping
Suspension: C-hub design, front and rear sway bars
Transmission: Ball bearing equipped
Differentials: Sealed silicone filled planetary gear type, center
diff installs trackside in minutes replacing the Torque Control
slipper
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Tires: Licensed BF Goodrich soft compound Mud Terrain T/A 4.3"
(109mm) diameter, 1.7" (43mm) wide
Wheels: 5-spoke brushed chrome, 0.98" (25mm) wide, 1.4" (35mm)
diameter, standard size 12mm hex, aluminum wheel nuts
Steering: Blue anodized aluminum steering blocks, spring loaded servo
protection, high torque digital ball bearing servo
steering servo, decals, aluminum C-hubs, steering blocks, rear hub
carriers and axle nuts, extra swaybar set, Big Bore shocks, clear
body, Velineon 3500 brushless motor and instruction manual
AA Cells: Eight for transmitter
Battery:
Charger:
Paint: Polycarbonate safe spray or brush-on
length: 22.36" (568mm)
width: 11.65" (296mm)
height: 8.42" (214mm)
Front and Rear Track: 11.65" (296mm) distance between outer edges of
wheels side-to-side
Ground Clearance: 2.5"
Body-
length: 21.25" (540mm)
width: 11.5" (292mm)
height: 5.5" (140mm)
Manufacturer information
All warranty claims should be handled directly through Traxxas and not your hobby dealer. If you suspect you have a warranty claim, contact Traxxas toll free at 888-TRAXXAS (872-9927). Many times Traxxas is able to immediately solve problems over the phone. Traxxas Corporation assumes responsibility for it's products and will repair or replace any defective product at it's sole discretion. The Traxxas toll-free customer service line provides direct access to factory trained representatives. In most cases, warranty items are sent out the same day the request is received. In the event that factory service is required, Traxxas technicians are usually able to make repairs within a 3-5 working day time frame after they receive the product. Traxxas offers a 30-day limited warranty on all it's electronic components and a two-year, manufacturer-defect warranty on Traxxas nitro-powered engines. To take advantage of any of the services Trxxas offers, or if you believe you have a warranty issue to solve, simply send in the item(s) in question to the Dallas address with attention to customer service. Include a copy of your receipt, a note describing the reasons you are sending the item(s) in to our repair lab, a daytime phone number, and a return shipping address.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Related parts
Additional details
Shipping weight
126.72 ounces
3592.45 grams
7.92 pounds
Package dimensions
10.00 x 13.00 x 25.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️