Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

discontinued E10 Drift Discount Tire Falken Nissan S13 RTR

This part is discontinued and we no longer carry it.

Manufacturer

Hobby Products Intl. logo

Part number

HPI109291

Real-time inventory

Out of stockClick to refresh

Price

$315.98
Sale -$115.99
$199.99

This part is discontinued and we no longer carry it.

Description


This is the 1/10 scale electric powered, 2.4GHz radio controlled, ready to run
HPI E10 Discount Tire/Falken Tire Nissan S13 Drift Car.
FEATURES:
Chassis: Bathtub type 0.078" (2mm) thick with quick change battery
holder and adjustable motor and radio equipment positions to
easily convert from street/touring to drift driving with no extra
parts to buy
Drive: Four wheel shaft
Radio: HPI TF-40 2.4GHz 2-channel pistol grip
Electronic Speed Control: SC-15WP with reverse
Motor: HPI Saturn 27T 540 size, HPIC1144
Charger: AC wall type
Battery: HPI Plazma 7.2V 2000mAh NiMh with Standard connector
Shocks: Composite bodied
Gearboxes: Closed
Differentials: Front and rear bevel-type
Transmission: Single-speed
Tires: Falken Azenis RT-615K type A drift
2.48" (63mm) diameter, 1.02" (26mm) wide
Wheels: HRE, chrome finish 2.08" (53mm) diameter, 1.02" (26mm) wide
Bumpers: Front, foam
Body: Pre-painted Nissan S13 coupe with all sponsor and body trim
decals applied
Suspension: Full-time independent
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver
YOU WILL RECEIVE:
HPI E10 Discount Tire/Falken Tire Nissan S13 Drift car with
painted body, 2.4GHz radio, ESC, battery, charger, wheels, tires,
27T motor four AA batteries and manual
REQUIREMENTS:
Misc. Items: Building and track equipment
SPECIFICATIONS:
VEHICLE-
length: 14.8" (375mm)
Width, Adjustable: 7.32, 7.56, 7.80" (186, 192, 198mm)
height: 4.25" (107.95mm)
Weight: 2.8 lbs (1270g) without body
Wheelbase: 10" (255mm)
Drive Ratio: 7.48:1
Tread: Front and rear 6.25" (158.75mm)(side-to-side at wheel centers)
Front Track: 7.25" (184.15mm)
Rear Track: 7.25" (184.15mm)
Spur Gear: 65T
Tires- Front and rear: 2.48" x 1.02" (63x26mm)
BODY-
length: 17.9" (455mm)
width: 7.4" (187mm) behind front wheels, narrowest point
8.1" (206mm) at rear wheels, widest point
height: 4.6" (116mm)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 12x18x14 Center drive shaft 1 DTXC1597
Body pictured on the box is painted red with Discount Tire/Falken
Tire graphics and sponsor decals.
jxs 10/29/12
ir/jxs
&

Manufacturer information

Hobby Products Intl. logo

Hobby Products Intl.

70 Icon Street

Foothill Ranch, CA 92610

https://www.hpiracing.com/

HPI Racing assumes responsibility for it products and will repair or replace any defective product at its sole discretion. HPI believes it is solely responsible for its products, therefore, Hobby Etc., Inc. will not be involved in any replacements. Please contact HPI directly.<br><br>Contact HPI Customer Service for any product related problems at 949-753-1099. HPI Customer Service hours are Monday - Friday 8:00 to 4:30 PST. The HPI website, www.hpiracing.com, has information and frequently asked questions about HPI products.

Compatible vehicles

E10

E10

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

4944258020365
109291
944258020365
HPID0291

Additional details

Shipping weight

121.95 ounces

3457.28 grams

7.62 pounds

Package dimensions

7.25 x 11.75 x 25.63

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️