discontinued Subaru Brz Tt-01e 4wd On-Road Kit
This part is discontinued and we no longer carry it.
Description
This is the electric powered 1/10 scale,
Subaru Brz Tt-01e 4wd On-Road Kit from Tamiya.
This truck can be used in Tamiya Official Races.
Chassis: TT-01 type E composite chassis-compatible with a variety of
Tamiya Option Parts
Drive: Four wheel shaft drive
Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541
Motor: 540 motor with pre-attached leads
Ball Bearings: Installed in differentials, bushings in wheel hubs
Shocks: Friction, plastic body
Gearbox: Sealed, front and rear
Differentials: Bevel gear, ball bearing equipped
Transmission: Single speed
Body: Clear untrimmed, with window mask and body trim decals
Tires: Treaded 1.0" (26mm) wide, 2.6" (65.5mm) diameter
Wheels: 5-spoke silver 2.0" (52mm) outer diameter, 1.0" (26mm) wide
and set of silver lace pattern 0.94" (24mm) wide, 2.0" (52mm)
diameter wheels with +2 offset
Bumper: Front foam
Suspension: Independent double wishbone
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Steering: Bell-crank type with servo saver
tires, foam bumper, 19 tooth pinion gear, 61 tooth spur gear,
window mask, decals, wheels and instruction manual
Radio: 2-channel with one standard servo
Radio Batteries: 8 AA size (for transmitter)
Battery: 6-cell stick pack with standard connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment
VEHICLE
length: 15.7" (400mm)
width: 7.2" (183mm)
height: 5.5" (140mm)
Wheelbase: 9.9" (251mm)
BODY-
length: 18.3" (464mm)
width: 7.7" (195mm)
height: 5" (127mm)
For replacement, or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Front Hubs 1 DTXC1547
2 5x11mm Rear Hubs 1 DTXC1547
2 8x12mm Front Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 5x11mm Fr Driveshaft Joint 1 DTXC1547
2 5x11mm Rear Driveshaft Joint 1 DTXC1547
Subaru Brz Tt-01e 4wd On-Road Kit from Tamiya.
This truck can be used in Tamiya Official Races.
FEATURES:
Tamiya Option Parts
Drive: Four wheel shaft drive
Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541
Motor: 540 motor with pre-attached leads
Ball Bearings: Installed in differentials, bushings in wheel hubs
Shocks: Friction, plastic body
Gearbox: Sealed, front and rear
Differentials: Bevel gear, ball bearing equipped
Transmission: Single speed
Body: Clear untrimmed, with window mask and body trim decals
Tires: Treaded 1.0" (26mm) wide, 2.6" (65.5mm) diameter
Wheels: 5-spoke silver 2.0" (52mm) outer diameter, 1.0" (26mm) wide
and set of silver lace pattern 0.94" (24mm) wide, 2.0" (52mm)
diameter wheels with +2 offset
Bumper: Front foam
Suspension: Independent double wishbone
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Steering: Bell-crank type with servo saver
YOU WILL RECEIVE:
Subaru Brz Tt-01e 4wd On-Road, 540 motor, ESC, clear body, tires, foam bumper, 19 tooth pinion gear, 61 tooth spur gear,
window mask, decals, wheels and instruction manual
REQUIREMENTS:
Radio Batteries: 8 AA size (for transmitter)
Battery: 6-cell stick pack with standard connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment
SPECIFICATIONS:
length: 15.7" (400mm)
width: 7.2" (183mm)
height: 5.5" (140mm)
Wheelbase: 9.9" (251mm)
BODY-
length: 18.3" (464mm)
width: 7.7" (195mm)
height: 5" (127mm)
COMMENTS:
Qty. Size Location Qty. Bearing Set
2 5x11mm Front Hubs 1 DTXC1547
2 5x11mm Rear Hubs 1 DTXC1547
2 8x12mm Front Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 5x11mm Fr Driveshaft Joint 1 DTXC1547
2 5x11mm Rear Driveshaft Joint 1 DTXC1547
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Additional details
Shipping weight
66.72 ounces
1891.60 grams
4.17 pounds
Package dimensions
6.00 x 9.13 x 19.13
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️