HPI brand HPI PLAZMA PRO 7.4V 5600mAh 95C Saddle Pack LiPo Battery. FEATURES: Hard plastic cases Ideal upgrade battery for the HPI Vorza, Savage, Bullet, and Trophy series and any other brushless powered 1/10 scale truggies, buggies or monster trucks that can accomodate saddle packs YOU WILL RECEIVE: PLAZMA PRO 7.4V 5600mAh Saddle Pack LiPo Battery with Deans Female Plug and JST-XH Balance Lead REQUIRES: LiPo compatible balancing charger SPECS: Each Cell; Dimensions: 1.8 x 0.98 x 2.7 (46.8 x 24.8 x 69mm) Weight: 5.8oz (165g) COMMENTS: ALWAYS use a LiPo-approved Charger ALWAYS use a LiPo Cell Balancer NEVER Charge over 4.2V per cell NEVER Charge at currents greater than 1C NEVER Charge through the To ESC or DISCHARGE lead NEVER Trickle Charge NEVER allow to Discharge below 2.5V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging ALWAYS Charge in a fireproof location ALWAYS set charger's output volts to match battery volts ALWAYS keep out of reach of children All weights include wire leads and plugs All weights +/- 1 g All measurements +/- 1 mm jxs 09/12/12 ir/jxs