This is the 1/10 scale Electric Powered, Radio Controlled, 4WD TB EVO.6MS Ver II Chassis Kit. Chassis: Aluminum 0.079" (2mm) lower deck, carbon fiber upper deck Drive: Four wheel, aluminum driveshaft Differentials: Sealed oil-filled gear type Shock: Oil-filled Big Bore aluminum body, new short design Shock Towers: Carbon fiber Ball Bearings: Full set of shielded bearings included Motor Mount: Aluminum Suspension: Four wheel independent, stabilizers are attached using ball connectors, redesigned front/rear arms with attachment points in dedicated racing positions Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster/Toe-In: Adjustable front and rear, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis TB EVO.6MS Ver II Chassis Kit with Shocks and Instructions Radio: 2-channel with high-speed steering servo Motor: 540 size _ ESC: Compatible with selected motor Battery: 2S 7.4V LiPo at least 4000mAh Battery Charger: To match selected battery Pinion Gear: 06 module Wheels: 0.94" (24mm) wide, 0° offset Tires: Medium narrow 0.94" (24mm) Body: Tamiya TB-04, TA06,and TA05 bodies will fit Building and track equipment Length: 14.5" (370mm) Width: 7.3" (185mm) Wheelbase: 10.1" (257mm) For Replacement Ball Bearings use: Qty. Size Location Qty Bearing Set 2 4x8mm flanged Ctr Bulkhead 1 DTXC1517 2 5x8mm flanged Ctr Shaft 1 DTXC1527 2 5x8mm Diff 1 DTXC1523 2 10x15mm Diff 1 DTXC1595 2 5x10mm Rear Gearbox 1 DTXC1535 2 5x10mm Direct Drive Unit 1 DTXC1535 2 5x10mm Front Input Shaft 1 DTXC1535 4 5x10mm Front Axles 2 DTXC1535 4 5x10mm Rear Axles 2 DTXC1535 jxs 05/18/16 ir/jxs &