This is the electric powered, radio controlled, 1/12 scale
New Man Joest Racing Porsche 956 On-Road Race Car Kit.
Chassis: 0.098" (2.5mm) thick composite fiber glass lower deck
Drive: Rear wheel direct, steel rear axle
Motor: 380 size brushed (540 motor, not included, can be installed
with the removal of motor plate adapter)
Front Suspension: Independent design with optimized kingpin trail
for increased stability
Rear Suspension: Pivot-Ball Link Rear (PBLR) with center pivot ball
pitch damper to control chassis pitch, roll damper and side links
to control chassis roll
Differential: Ball type
Wheels: White plastic 1.4" (36.2mm) diameter, front 0.94" (24mm) wide
rear, 1.4" (35.5mm) wide, hex hub type and 3-screw wheels can be
used with this chassis
Tires: High grip sponge design 1.9 (47.5mm) outer diameter, front
0.98" (25mm) wide, rear 1.2" (32mm) wide
Body: Clear untrimmed polycarbonate plastic with white plastic
helmeted driver head
Spur Gear: Plastic 63T 06 module
New Man Joest Racing Porsche 956 On-Road Race Car Kit, Tires, Wheels
Body, Decals 14T Pinion Gear and Instruction Manual
Radio: 2-channel with standard size steering servo
Battery: 2S 7.4V LiPo (#55105 6.6V LiFe battery recommended by
Tamiya not available in USA)
ESC: Compatible with included motor
Battery Charger: LiPo compatible
Polycarbonate safe spray or brush on paint
Building and track equipment
Vehicle
Wheelbase: 7.9" (201mm)
Body;
length: 14.5" (368mm)
width: 6.5" (165mm)
height: 2.8" (71mm)
To replace Ball Bearings use:
Qty. Size Location Qty. Bearing Set
1 6x12mm Ball Diff 1 DTXC1569
1 6x10mm Ball Diff 1 DTXC1561
1 5x11mm Ball Diff 1 DTXC1547
2 6x10mm Rear Wheels 1 DTXC1561
4 5x11mm Front Wheels 1 DTXC1547
jxs 05/03/12
ir/jxs
&