This is the DuraTrax Onyx 7.4V 8000mAh 25C Soft Case LiPo Battery with the TRA Plug. Ideal for 1/10 scale car applications Prewired with TRA high current connector 7.4V 8000mAh 25C Soft Case LiPo Battery with TRA High Current Connector Balancer and LiPo compatible charger or LiPo charger with built-in balancer such as the Onyx 235, DTXP4235 Voltage Rating: 7.4V Rated Capacity: 8000mAh Discharge Rating: 25C continuous 1.3 x 1.7 x 5.3" (33 x 43 x 135mm) Weight: 14oz (395.4g) Discharge Lead/Connectors: 12AWG 3.9" (100mm) Wires, TRA Plug Balancing Connector: ElectriFly Watt Hours: 59Wh ALWAYS use a LiPo-approved Charger ALWAYS use a LiPo Cell Balancer NEVER Charge over 4.2V per cell NEVER Charge at currents greater than 1C NEVER Charge through the "To ESC or "DISCHARGE" lead NEVER Trickle Charge NEVER allow to Discharge below 2.5V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging ALWAYS Charge in a fireproof location ALWAYS set charger's output volts to match battery volts ALWAYS keep out of reach of children All weights include wire leads and plugs All weights +/- 1 g All measurements +/- 1 mm jxs 03/02/12 ir/jxs &