discontinued 1/10 Ferrari 599xx (Tt-01 Type-E) Kit
This part is discontinued and we no longer carry it.
Description
This is the electric powered 1/10 scale, Ferrari 599XX On-Road Car Kit.
This car can be used in Tamiya Official Races.
FEATURES:
Tamiya Option Parts, fiberglass reinforced nylon resin upper deck
Drive: Four wheel shaft drive
Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541
Motor: 540 motor with pre-attached leads
Ball Bearings: Installed in differentials, bushings in wheel hubs
Shocks: Friction, plastic body
Gearbox: Sealed, front and rear
Differentials: Bevel gear, ball bearing equipped
Transmission: Single speed
Body: Clear untrimmed, with window mask and body trim decals
Tires: Slick 1.0" (26mm) wide, 2.6" (65.5mm) diameter
Wheels: Lace pattern black 2.0" (52mm) outer diameter, 1.0" (26mm)
wide and set of silver colored 0.94" (24mm) wide, 2.0" (52mm)
diameter wheels with +2 offset
Bumper: Front foam
Suspension: Independent double wishbone
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Steering: Bell-crank type with servo saver
YOU WILL RECEIVE:
Ferrari 599XX 540 motor, ESC, clear body, tires, foam bumper, 19T pinion gear, 61 tooth spur gear, window mask decals, two sets of
wheels and instruction manual
REQUIREMENTS:
Radio Batteries: 8 AA size (for transmitter)
Battery: 6-cell stick pack with standard connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment
SPECIFICATIONS:
length: 15.7" (400mm)
width: 7.2" (183mm)
height: 5.5" (140mm)
Wheelbase: 9.9" (251mm)
BODY-
length: 17.5" (445mm)
width: 7.6" (194mm)
height: 4" (102mm)
COMMENTS:
Qty. Size Location Qty. Bearing Set
2 5x11mm Front Hubs 1 DTXC1547
2 5x11mm Rear Hubs 1 DTXC1547
2 8x12mm Front Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 5x11mm Fr Driveshaft Joint 1 DTXC1547
2 5x11mm Rear Driveshaft Joint 1 DTXC1547
Body shown on box is painted red.
jxs 02/13/12
ir/jxs
&
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Additional details
Shipping weight
68.16 ounces
1932.42 grams
4.26 pounds
Package dimensions
6.00 x 9.13 x 19.13
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️