Sand Rover 2011 2WD Off Road Truck Kit
Description
This is the electric powered, radio controlled, 1/10 scale,
Tamiya Sand Rover 2011 Dune Buggy Kit.
Drive: Rear wheel
Motor: 380 size (540 size will fit, see COMMENTS)
Pinion Gear: 10 tooth metal
Electronic Speed Control: Tamiya TEU-104BK with reverse
Differential: Planetary gear
Gearbox: Sealed
Shocks: Plastic body, friction type
Transmission: Single-speed
Suspension: Four wheel independent
Body: Molded plastic, white in color
Steering: Two-piece adjustable steering tie rods with servo saver
Tires: Ribbed front 0.83" (21mm) wide, 3.1" (80mm) diameter
Spiked rear 1.5" (39mm) wide, 3.2" (82mm) diameter
Wheels: Nylon resin, white in color
Front, 0.69" (17.5mm) wide, 2.2" (57mm) diameter
Rear, 1.3" (33mm) wide, 2.2" (57mm) diameter, 12mm hex
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-adjustable
380 Motor, Servo Saver, Driver Figure, Decals and Instruction
Manual
Battery: 6-cell, 7.2V nimh stick pack with standard connector
Battery Charger: To match selected battery
Transmitter Batteries: Four or eight depending on transmitter
Tools and track equipment
length: 15.3" (390mm)
width: 9.4" (240mm)
height: 6.6" (168mm)
Weight: 2.9lbs (1350g), approximate
Body;
length: 14.3" (364mm)
width: 7.1" (180mm)
height: 2.3" (55mm)
and must be purchased separately;
Tamiya #3515005 17 Tooth Pinion Gear (not carried)
3mm Grub Screw (TAMC5076)
Motor Plate (TAMC3120)
To paint body to match photos on box, order the following Tamiya
colors;
TS-12 Orange, TAMR5012 XF-2 Flat White, TAMC8402
X-7 Red, TAMR1507 XF-9 Hull Red, TAMR8409
X-11 chrome Silver, TAMR8111 XF-15 Flat Flesh, TAMR8415
X-18 Semi Gloss Black, TAMR8118
To upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x11mm Gearbox 2 DTXC1547
2 5x11mm Spur Gear 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
4 5x11mm Front Wheels 2 DTXC1547
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
69.12 ounces
1959.64 grams
4.32 pounds
Package dimensions
5.50 x 10.38 x 15.60
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️