This is the 1/10 scale, electric powered, 2.4GHz radio controlled, RTR HPI On-Road Sprint 2 Sport with the 1969 Chevy Camaro Z/28 Body. Chassis: 3/16" (4mm) thick plastic Drive: Four wheel belt drive Motor: 15 turn Firebolt, aluminum motor mount Radio: HPI TF-40 3-channel 2.4GHz with steering dual rate, end points failsafe and 3rd channel for optional accessories, SF-10W water- proof steering servo, and four AA transmitter batteries Electronic Speed Control: SC-15WP waterproof and LiPo capable Battery: HPI 7.2V Plazma 6-cell stick pack, chassis also accepts saddle packs or 2S LiPo packs Battery Charger: Wall type Ball Bearings: Full set included Shocks: Oil-filled, aluminum bodied Differentials: Planetary gear with metal outdrives Transmission: Single speed Tires: Vintage tread pattern, Front, 1.1" (27mm) wide, 2.5" (65mm) diameter, Rear, 1.2" (31mm) wide, 2.5" (65mm) diameter Wheels: Vintage design five spoke brushed chrome, Front, 1.02" (26mm) wide, 1.6" (42mm) diameter, Rear, 1.2" (31mm) wide, 1.6" (42mm) diameter Pinion Gear: 28 tooth 48 pitch metal Spur Gear: 48 pitch, 87 tooth, composite construction Body: Painted and trimmed 1969 Camaro Z/28 with front spoiler and rear wing Bumper: Front, foam Suspension: Fully adjustable Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Bell-crank type with servo saver Warranty: Two year limited warranty through HPI beginning at purchase date. Valid only in the USA, Canada and South America HPI On-Road Sprint 2 1969 Camaro with brushed motor, electronic speed control, painted body, tires, foam inserts, wheels, 28 tooth pinion gear, 87 tooth spur gear, 2.4GHz radio, steering servo, decal sheet, 4 AA transmitter batteries, instructions, 7.2V NiMH battery, and wall charger _ Radio Batteries: (8) AA size Misc. Items: Building and track equipment VEHICLE- Length: 17" (431mm) Width: 7.5" (190mm) Height: 5" (127mm) Wheelbase: 10" (255mm) Front Track: 7.38" (187.5mm) side to side at outer edges of wheel Rear Track: 7.7" (197mm) Front Tread: 6.4" (162mm) Rear Tread: 6.6" (167mm) side-to-side at wheel centers Ground Clearance: 0.5" (13mm) BODY- Length: 17.5" (444mm) Width: 8.1" (205mm) at rear wheels (widest point) 7.5" (190mm) behind from wheels (thinnest point) Height: 4.1" (104mm) For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 4 5x10mm Fr Wheels 2 DTXC1535 4 5x10mm Rear Wheels 2 DTXC1535 2 10x15mm Fr Diff 1 DTXC1595 2 2x8mm Fr Diff 1 DTXC1523 2 10x15mm Rear Diff 1 DTXC1595 2 2x8mm Rear Diff 1 DTXC1523 2 4x8mm Servo Saver 1 DTXC1511 2 4x8mm Middle Lay Shaft 1 DTXC1511 jxs 08/02/11 ir/jxs &