This is the 1/10 scale, electric powered, 2.4GHz radio controlled, RTR
HPI On-Road Sprint 2 Sport with the 1969 Chevy Camaro Z/28 Body.
Chassis: 3/16" (4mm) thick plastic
Drive: Four wheel belt drive
Motor: 15 turn Firebolt, aluminum motor mount
Radio: HPI TF-40 3-channel 2.4GHz with steering dual rate, end points
failsafe and 3rd channel for optional accessories, SF-10W water-
proof steering servo, and four AA transmitter batteries
Electronic Speed Control: SC-15WP waterproof and LiPo capable
Battery: HPI 7.2V Plazma 6-cell stick pack, chassis also accepts
saddle packs or 2S LiPo packs
Battery Charger: Wall type
Ball Bearings: Full set included
Shocks: Oil-filled, aluminum bodied
Differentials: Planetary gear with metal outdrives
Transmission: Single speed
Tires: Vintage tread pattern, Front, 1.1" (27mm) wide, 2.5" (65mm)
diameter, Rear, 1.2" (31mm) wide, 2.5" (65mm) diameter
Wheels: Vintage design five spoke brushed chrome, Front, 1.02" (26mm)
wide, 1.6" (42mm) diameter, Rear, 1.2" (31mm) wide, 1.6" (42mm)
diameter
Pinion Gear: 28 tooth 48 pitch metal
Spur Gear: 48 pitch, 87 tooth, composite construction
Body: Painted and trimmed 1969 Camaro Z/28 with front spoiler and
rear wing
Bumper: Front, foam
Suspension: Fully adjustable
Ackerman: Adjustable, Ackerman describes the effect of the inner
front wheel turning faster than the outer front wheel during turns
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Steering: Bell-crank type with servo saver
Warranty: Two year limited warranty through HPI beginning at purchase
date. Valid only in the USA, Canada and South America
HPI On-Road Sprint 2 1969 Camaro with brushed motor, electronic
speed control, painted body, tires, foam inserts, wheels, 28 tooth
pinion gear, 87 tooth spur gear, 2.4GHz radio, steering servo,
decal sheet, 4 AA transmitter batteries, instructions, 7.2V NiMH
battery, and wall charger
_
Radio Batteries: (8) AA size
Misc. Items: Building and track equipment
VEHICLE-
Length: 17" (431mm)
Width: 7.5" (190mm)
Height: 5" (127mm)
Wheelbase: 10" (255mm)
Front Track: 7.38" (187.5mm) side to side at outer edges of wheel
Rear Track: 7.7" (197mm)
Front Tread: 6.4" (162mm)
Rear Tread: 6.6" (167mm) side-to-side at wheel centers
Ground Clearance: 0.5" (13mm)
BODY-
Length: 17.5" (444mm)
Width: 8.1" (205mm) at rear wheels (widest point)
7.5" (190mm) behind from wheels (thinnest point)
Height: 4.1" (104mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10mm Fr Wheels 2 DTXC1535
4 5x10mm Rear Wheels 2 DTXC1535
2 10x15mm Fr Diff 1 DTXC1595
2 2x8mm Fr Diff 1 DTXC1523
2 10x15mm Rear Diff 1 DTXC1595
2 2x8mm Rear Diff 1 DTXC1523
2 4x8mm Servo Saver 1 DTXC1511
2 4x8mm Middle Lay Shaft 1 DTXC1511
jxs 08/02/11
ir/jxs
&