This is the Hitec X2-400 Dual Port Charger, Discharger and Balancer.
Charges 1-6S LiPo, LiFe LiIon, 1-15 cell NiCd, NiMh, and
1-10 cell Lead Acid (Pb) batteries, batteries do not have to be the
same chemistry or configuration to be charged at the same time
Two independent 400 watt charging ports charge up to 20 amps and
discharge at 0-1.5 amps
Two high-contrast LCD displays
Fast, balance, and storage charge modes for lithium batteries
Five user customizable presets per channel
Temperature threshold (temperature probe required)
PC based analysis using USB communication (PC-LINK USB adaptor
required, must be purchased separately)
Aluminum case
One year limited warranty through Hitec beginning at date of
purchase
Hitec X2-400 Dual Port Multicharger with XH Balance Board, Thunder-
Power/FlightPower Balance Board, two Alligator Clips, 10AWG
Input Leads with 4mm Banana Plugs, Crocodile Clip Charging Cable,
two 18AWG Charging Cables with Pretinned Leads, Instruction Manual
12-18V DC Power Supply with a minumum amperage rating of 60A
Input Voltage Range: 12-18V DC
Required Input Amperage: 60A
Charger Circuit Power: 400 watts x 2
Discharge Circuit Power: 25W
Charge Current Range: 0.1-20A per channel
Discharge Current Range: 0.1-5A per channel
LiPo. LiFe and LiIon Balancing Current Drain: 200mA per cell
LiPo. LiFe and LiIon Cell Count: 1-6 cells
Maximum NiCd, NiMh Cell Count: 1-15 cells
Lead Acid Cells/Voltage: 2-20 volts
8.9 x 6.7 x 2.6" (226 x 170 x 66mm)
Weight: 3.4lbs (1542g)
jxs 07/06/12
ir/jxs
&