Tamiya brand 1/10 scale, electric powered, radio controlled
McLaren MP4/5B Honda Racing Car kit from Tamiya.
Chassis: composite fiber glass construction F104W double deck with 0.08 (2mm) upper,
and 0.12 (3.2mm) lower deck
Drive: Two wheel direct with stainless steel rear shaft
Differential: Ball type with resin housing
Motor: 540 size brushed
Ball Bearings: Full set
Body: Clear, polycarbonate
Bumper: Front, resin
Steering: Two-piece tie-rods, Isometric steering rod links with
longitudinally mounted steering servo position, servo saver
Suspension: Front, kingpin coil with spacers for ground clearance
adjustment, F103 front arms to mimic wider dimensions of earlier F1
cars of the 1990s era
Rear, T-bar with carbon friction plate and friction shock
Tires: Racing slicks, Front; 2.3 (58mm) diameter, 1.2 (30mm) wide
Rear; 2.4 (62mm) diameter, 1.8 (46mm) wide
Wheels: Black plastic, Front: 1.4 (36mm) diameter, 1.2 (31.3mm)
wide, Rear: 1.4 (36mm) diameter, 1.7 (44.5mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-adjustable
Spur Gear: Plastic, 63 tooth, 06 module
Pinion Gear: 17 tooth metal
Tamiya F104W McLaren MP4/5B Honda Racing Car kit with clear body,
decals, spur gear, pinion gear, wheels, tires, motor and
instructions
Radio: 2-channel, small ESC and receiver recommended, standard servo
Radio Batteries: Eight AA
Battery: 6-cell stick pack with Tamiya type connector
Battery Charger: Peak type recommended
Building and track equipment
Vehicle-
length: 16.7 (425mm)
width: 7.9 (200mm)
height: 3.8 (97mm)
Weight: 23.9oz (680g)
Body-
length: 14.6 (372mm)
width: 6 (152mm)
height: 3.7 (95mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Rear Shaft 1 DTXC1561
2 8x12mm Ball Diff 1 DTXC1581
4 5x8mm Front Wheels 2 DTXC1523
2 8x12mm Rear Drive Wheel 1 DTXC1581