Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

1/10 Weider Hsv-010 (Tt-01 Type-E Chassis)

Manufacturer

Tamiya logo

Part number

TAM58487

Real-time inventory

Out of stockClick to refresh

Price

$265.80
Sale -$39.40
$226.40

This part is not currently in stock.

Description

This is the electric powered 1/10 scale, Weider HSV-10 On-Road Car Kit. This car can be used in Tamiya Official Races.
FEATURES:
Chassis: TT-01 type E composite chassis-compatible with a variety of Tamiya Option Parts Drive: Four wheel shaft drive Electronic Speed Control: Tamiya TEU-104BK with reverse Motor: 540 motor with pre-attached leads Ball Bearings: Installed in differentials, bushings in wheel hubs Shocks: Friction, plastic body Gearbox: Sealed, front and rear Differentials: Bevel gear, bushing equipped Transmission: Single speed Body: Clear untrimmed, with window mask and body trim decals Tires: Slick 1.0" (26mm) wide, 2.5" (65mm) diameter Wheels: 6-spoke gray 2.0" (52mm) outer diameter, 1.0" (26mm) wide and set of blue lace pattern 0.94" (24mm) wide, 2.0" (52mm) diameter wheels with +2° offset Bumper: Front foam Suspension: Independent double wishbone Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bell-crank type with servo saver
YOU WILL RECEIVE:
Weider HSV-10 kit, 540 motor, ESC, clear body, tires, foam bumper, 19 tooth pinion gear, 61 tooth spur gear, window mask decals, two sets of wheels and instruction manual
REQUIREMENTS:
Radio: 2-channel with one standard servo Radio Batteries: 8 AA size (for transmitter) Battery: 6-cell stick pack with standard connector Charger: AC/DC timed or peak for 6-cell battery Misc. Items: Building and track equipment
SPECIFICATIONS:
VEHICLE-- Length: 15.7" (400mm) Width: 7.2" (183mm) Height: 5.5" (140mm) Wheelbase: 9.9" (251mm) BODY- Length: 16.5" (420mm) Width: 7.5" (190mm) Height: 4" (102mm)
COMMENTS:
For replacement, or to upgrade to Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 5x11mm Front Hubs 1 DTXC1547 2 5x11mm Rear Hubs 1 DTXC1547 2 8x12mm Front Diff 1 DTXC1581 2 8x12mm Rear Diff 1 DTXC1581 2 5x11mm Fr Driveshaft Joint 1 DTXC1547 2 5x11mm Rear Driveshaft Joint 1 DTXC1547 Body shown on box is painted silver with all decals applied jxs 05/29/12 ir/jxs &

Manufacturer information

Tamiya logo

Tamiya

2 Orion

Aliso Viejo, CA 92656-4200

https://www.tamiyausa.com/

All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

4950344584871
TAMC8488

Additional details

Shipping weight

71.04 ounces

2014.07 grams

4.44 pounds

Package dimensions

19.13 x 9.13 x 6.13

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️