This is the Great Planes ElectriFly Equinox LiPo Balancer. For LiPo (Lithium Polymer) battery packs with 2 to 5 cells, assembled IN SERIES and wired for Balancing. NOT Compatible with LiPo packs having a 2-pin Charge lead. Regulates voltages of all cells in a Lithium Polymer pack to very tight tolerances during Charge and Discharge functions and provides a safe Charging and Discharging platform which is critical when handling LiPo batteries Eight status LEDs and pushbutton control Gold plated banana plugs on input for easy connection to Charger/ Discharger Automatically checks for poor quality cells Maximum current handling capacity is 3A (current of up to 6A maximum is possible by using high-power adapters available separately, such as GPMM3163). 1-year limited warranty Unlike some Balancers, Equinox has two separate functions: QUICK-BALANCE MODE: applies a small Discharge current to gently Balance voltages of all cells in a LiPo pack. INTERFACE MODE: allows the Equinox to be used with a separate Charger or Discharger whereby it will monitor and control how each cell in the LiPo pack is Charged or Discharged. Balanced packs typically charge to the fullest possible safe voltage, meaning more power to the motor system. Also, these packs generally last longer as no individual cell becomes overcharged. Overcharging is one reason why LiPo packs fail Great Planes ElectriFly Equinox LiPo Balancer with 2S and 3S battery adapters for ElectriFly, Venom, and ESky LiPos which are wired for Balancing Interface Mode and Connection Flowchart and instruction manual LiPo batteries with a compatible Balance Connector CANNOT BE USED WITH LiPo PACKS NOT WIRED FOR BALANCING Compatible Input Devices: LiPo Chargers and Dischargers ONLY (operation based on nominal cell voltage of 3.7V per cell) Cell Balancing Range: 2-series to 5-series LiPo packs (7.4-18.5V) Max. Charge Current: 3A (over 3A requires special harness) Discharge Termination: Auto-cut based on individual cell voltages 2.75V per cell in Quick-Balance Mode 3V per cell in Interface Mode (with separate Discharger) Quick-Balance Mode Discharge Current: 120mA per cell Overload Protection: 7.5A auto (spade) fuse 3.23 x 1.57 x .59 in (82 x 40 x 15mm) Weight: 1.55oz (43.8g) The following adapters are available; Equinox 2S-3S Replacement Adapters GPMM3161 Equinox 4S-5S Adapter Set GPMM3162 Equinox 2S-5S High Power Adapters GPMM3163 GPMM3180 EQUINOX 2S ADAPTERS FLTPOWER (3) GPMM3181 EQUINOX 3S ADAPTERS FLTPOWER (3) GPMM3182 EQUINOX 4S ADAPTERS FLTPOWER (3) GPMM3183 EQUINOX 5S ADAPTERS FLTPOWER (3) GPMM3185 EQUINOX 2S HI POWER ADAPTERS FLIGHTPOWER, THUNDERPOWER (3) GPMM3186 EQUINOX 3S HI POWER ADAPTERS FLIGHTPOWER, THUNDERPOWER (3) GPMM3187 EQUINOX 4S HI POWER ADAPTERS FLIGHTPOWER, THUNDERPOWER (3) GPMM3188 EQUINOX 5S HI POWER ADAPTERS FLIGHTPOWER, THUNDERPOWER (3) jxs 3/7/06 ir/jxs adpt.info updt jxs 10/10/06 &