This part is discontinued and we no longer carry it.
This is the Reedy LiPo 2500mAh 7.4V TX LiPo Battery for M11X TX
For your Airtronics/Sanwa M11X radio
Balance connector
Durable case designed to protect battery
One Reedy LiPo 2500mAh 7.4V LiPo TX Battery
A Lipo charger like the Duratrax ICE and a balancing
module like the Equinox Lipo Cell Balancer (GPMM3160)
Length: 2 7/8" (73mm)
Width: 1 7/8" (46.6mm)
Height: 1/2" (12.7mm)
Weight: 3.5oz (100g)
Lead Wire Size: 22 AWG
Lead Wire Length: 4 1/4" (108mm) approximate
+ Min. Discharge Volts: 6.0V
Charge rate: 2.5 amp
ALWAYS use a LiPo-approved charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
Charging
ALWAYS charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
jpg 1/27/11
&
Associated prefers to deal direct with customers on questions of warranty and returns. Please contact Associated directly regarding such issues. All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
4.00 ounces
113.41 grams
0.25 pounds
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️